What makes a good toilet?

But there are mainly such a few types. Rear drain toilets, measured drain buckets, and the most commonly used floor drain toilets. In general, floor drain toilets are the most.

Toilets are also divided into siphon toilets and flush toilets. Flush toilet, toilet does not store water, there is no S bend, the flush pressure is high, the disadvantage is that it is easy to return to the smell, but it is cheap. Siphon toilet with S-bend deodorization.

It is recommended to buy''Buy a siphon toilet. The pit spacing is generally 300 type, or 400 type. The specific installation size depends on the distance between the ground pipe and the wall at home, and also chooses different pit distance toilets.

There is also an old-fashioned split toilet and a one-piece toilet. Split toilets, cisterns and toilets are not one. Such a toilet is troublesome to repair and replace accessories later.

The fittings of the one-piece toilet are easy to replace.

Of course, it is not easy to scale, the surface is smooth, easy to clean and flush quickly, those that save water are fake, the toilet that comes with my house is 100 yuan, the porcelain is very good, the basic ones mentioned above are there, and the toilet of 500 yuan bought by friends is often blocked.

First, the flushing method.

Nowadays, most toilets on the market are siphoned, which is easy to flush off the swag that adheres to the surface of the toilet. The disadvantage is that it is water-consuming and easy to block. It is not easy to clog directly and is easy to smell when it is disadvantaged.

Second, the effect of sewage discharge.

Flush check: Flush 3 times, at least 5 water-filled ping pong balls can be flushed. Also check the blowdown effect. Put in a piece of paper and drop a drop of ink, it should be drained at once without leaving a trace.

3. Touch the surface.

Gently touch the surface of the toilet bowl with your hands, if there is no uneven feeling, and the glaze and embryo feel are very delicate, the surface of the toilet bowl, its surface quality is better. If it is a low-to-medium grade toilet, the glaze and embryonic body on its surface will be rough, the color will be dull, and there will be small holes under the illumination of the light. Dig your hand deep into the stain, the inside should be smooth, rough and unglazed, and easy to leak.

Fourth, determine the pit distance.

Find out how the toilet drains its water horizontally into the wall or under the floor. Horizontal drain toilets must be clearly distanced (the distance between the center line of the toilet rear drain and the ground). The lower drain toilet must be clear about the pit distance.

Pit spacing refers to the distance between the center of the drain pipe of the toilet bowl and the wall. Generally, there are 300mm, 350mm, 400mm, 450mm, etc. Be sure to measure the pit distance first, and then choose the toilet with the pit spacing.

Choose this year's black technology, which is more environmentally friendly, automatically lifts the lid, and does not require a power supply.

TOTO's. It won't clog after decades... I feel like this is a good toilet.

Water saving, punch, and service after buying a toilet.

Toilets are a necessity in life, and according to statistics, people spend an average of 35 minutes a day in the bathroom, and this time is increasing! Therefore, choosing a comfortable and durable toilet for yourself and your family will reduce a lot of unnecessary troubles in the future. So what are the tips for buying a toilet?

I'm going to talk to you today.

1.Split or Siamese?

The toilet is divided into split and conjoined type, and the one-piece toilet should be preferred if you choose it at home, and there is no gap between the water tank and the base, which is not only beautiful, but also has no sanitary dead ends, which is convenient for daily cleaning, and is the first choice for home use.

2.Flush OR siphon type?

The common flushing methods of toilets are flush type and siphon type. The direct flush type is noisy and easy to hang dirt, so it is not recommended to buy; Siphon type, large impulse, less water consumption, low noise, good anti-odor effect, to give priority to buy!

3.Look at the weight

Generally, the heavier the toilet, the better the quality, because the good ceramic firing temperature is high, the porcelain is higher, and the density is higher.

4.Look at the water pieces

The quality of water parts affects the life of the toilet, so open the lid of the water tank and carefully check the workmanship of the internal material when purchasing; At the same time, you can press the flush button to the end, the sound is crisp, the rebound is smooth, it is a good water piece!

5.Look at the glaze

The glaze of a good quality toilet bowl is smooth and smooth, the feel is delicate, and the anti-stain performance is good! It can be tested with a marker, the better it is cleaned, the more stain resistant it is!

PS .Remember to see if the inside of the drain is glazed, whether it is smooth, if it is not decisively passed