-
Anonymous users2024-01-23They are hardware and frame, glass material and water retaining strip, which are the main components of the shower room, and its quality directly determines the use time of the shower room. For example, the ideal bathroom has tempered glass certified by the national 3C certification and high-quality stainless steel.
-
Anonymous users2024-01-221. There is a 3C certification mark, and it is better to print it directly on the glass with a laser;
2. The thickness of tempered glass is 4mm, 6mm, 8mm, 10mm and other specifications, generally 6mm and 8mm can be used;
3. Check whether the edge of the glass is damaged, whether the chamfering edge is smooth, and the probability of self-explosion after the installation of the problematic product will be much greater;
Fourth, no matter how good the shower room is, there will be a self-explosion rate of 3 per 1,000, so it is best to paste a layer of explosion-proof film on the glass, even if there is a real problem, the glass fragments will only adhere to the film and will not splash and hurt people. Now in addition to ordinary tempered glass, there are many businesses that have launched tempered glass or laminated glass with CCCs certification, the price will be more expensive than ordinary tempered glass, and the product itself has explosion-proof function.
Step 2: The aluminum of the shower room should be strong.
The poor thickness of aluminum is only, most of them are made of recycled waste aluminum in order to save costs, the surface is more trachoma, pinholes, lines, dark color, soft texture, easy to deform or break, difficult to clean at home, easy to rust, easy to cause the shower room to explode. Good aluminum is not only strictly controlled in terms of material selection, but also has a multi-layer treatment on the surface, with a firm coating, bright tone, and no corrosion, and the thickness will be, and some can even reach 2mm.
Step 3: The shower room slide should be smooth.
Poor quality slide rails are difficult to pull, and the glass is prone to explosion if the force is uneven when pulling hard. Therefore, the wheel seat of the pulley should use compression-resistant and heavy-resistant materials, such as 304 stainless steel and high-end synthetic materials. The sealing of the wheel seat is good, and the water vapor is not easy to enter the wheel, so the smoothness of the wheel can be guaranteed.
Look at the coordination of the pulley and the aluminum track The two need to be closely matched, the gap is small, and it is not easy to fall off when encountering a strong external force to avoid the occurrence of safety accidents.
The two technical indicators of a sponge are: density and rebound index. The density is good and the high quality is good, and the price is high. >>>More
The cabinet structure of cabinet furniture is loose, the tenon joint part is not firm, and there are broken tenons and broken materials; The top plate, the bottom plate and the side hill of wood-based panel furniture are connected with nails, and the process is extremely unreasonable. >>>More
The quality of the furniture plate can be seen with the naked eye to see the surface smoothness and flatness of the furniture plate, and the glue bonding of the plate section. Then look at the edges used to make furniture. Finally, smell for odors.
It's good, beautiful and practical.
When purchasing, we must pay attention to the details, hinges, sealing strips, slide rails, handles should all try, pay attention to the details of the product, in addition to other key points of consideration, glass and glass, glass and wall junction sealing strips are also very important. A good quality shower room seal should not have a break point at the hinge, and the seal between the glass doors should be magnetic, so that the water retention performance will be better.