How to oil the anti theft door?

1. Under normal circumstances, the anti-theft door hinge rings, and the grease can be directly applied to the hinge gap, which will slowly penetrate into the hinge. The rattling sound can be relieved, and the wax needs to be reapplied every six months.

2. If the new door does not sound when it is installed, there is a sound after using it for a period of time. It may be that the door panel is overopened when opening the door, and the angle between the hinge and the door panel is deformed, the adjustment method is to open the door, use a screwdriver (or screwdriver handle) to insert it into the large gap between the lower hinge and the door frame, and slowly close the door.

3. Adjust the adjustable hinge, loosen the five small screws of the hinge, turn the eccentric screw in the middle, turn to the desired gap, if the gap is not enough, stuff things between the door panel and the door frame, and then pull out the thing after the adjustment is completed, and then adjust it after a few times, and finally tighten all the screws.

Apply grease directly to the hinge and it will slowly penetrate into the hinge.

The full name of the security door"Anti-theft security door"。It combines anti-theft and security performance. According to the provisions of the "General Technical Conditions for Anti-theft Security Doors", qualified anti-theft doors cannot be pried open within 15 minutes by using ordinary hand tools such as chisels, screwdrivers, crowbars and portable power tools such as hand drills, or open an opening of 615 square millimeters on the door leaf, or open an opening of 38 square millimeters in a semicircle of 150 square millimeters of locking points.

And the locks used on the anti-theft door must be a special lock for the anti-theft door with anti-drilling function that has been tested and qualified by the testing center of the Ministry of Public Security. The anti-theft door can be made of different materials, but only the door that meets the standard test and receives the safety product production certificate can be called an anti-theft door.

Enter the area and get a free renovation quote].

After the security door at home has been used for a long time, it may make a squeaky sound when it is opened, which will affect the rest of the family in serious cases. Some people recommend that you can oil the security door, the question is, how to oil the security door? Where to oil?

1. How to oil the anti-theft door 1. If the anti-theft door has an abnormal noise, it is because there is a fault in the hinge, such as dust entering the hinge, which will cause friction and noise. So we can apply some lubricating oil to the hinges, and we can also apply butter, but it is best not to apply cooking oil at home, the effect is not particularly good. 2. Then we can first remove the dust at the hinge, wipe it with a rag, drop a few drops of lubricating oil, and finally you will find that the sound disappears magically when you open and close the door.

Second, what is going on with the sound of the anti-theft door, the abnormal sound of the anti-theft door may also be because of the deformation of the anti-theft door, so we need to lift the bottom up, you can use a wooden wedge to put it below, between the door frame and the door leaf can also be stuffed things, after the adjustment is completed, and then pull out the things, and you can adjust it after a few times. Finally, it is necessary to check that all the screws and hinges should be tighter, which can also effectively solve the problem of abnormal noise. 3. Which materials are better to choose for anti-theft doors 1. There are many materials for anti-theft doors, such as stainless steel anti-theft doors, the biggest advantage is that they are exquisite, and they are very firm, and they are not easy to deform.

It will not have the problem of abnormal noise for a long time, and it will burn and its corrosion resistance and aging resistance line are very good. Even if the surrounding environment is relatively harsh and affected by the wind and rain, it cannot be rusted and deformed. 2. If you want aesthetics, you can choose aluminum alloy anti-theft doors or copper anti-theft doors, which are still very good in the current building materials market, whether they are fireproof, anti-corrosion, or anti-theft, and the performance is relatively stable.

Summary: If you find that the security door at home has the problem of abnormal noise, most of it is because the hinge is rusty or loose, you can drip lubricating oil on the hinge, and then tighten the hinge and screws, which can effectively solve the problem of abnormal noise of the security door.

Do the math how much it will cost you to renovate your home

Lubricating oil is the most common method and works well.

The lubricant can be a clean engine oil for automobiles or motorcycles, or a gearbox oil for automobilesUsing a large syringe (medical syringe), aspirate 2 ml of motor oil and fill a small amount of yourself into the hinge gap of the door shaft , the amount of filling must be small, Otherwise, the outgoing oil can contaminate the door and door frame and even destroy the paint layer.

Except for the bottom gap on a single door shaft, all the remaining gaps should be filled with a little oil, and all the door shafts are treated as above, and the feeling of opening and closing this door is the same as that of a newly installed door, or even better.

First remove the dust from the hinges, wipe it with a rag, and drop a few drops of lubricating oil. When the door is closed, there is a lot of time because there is dust entering the hinge, which will cause friction, which will make noise, just apply some lubricating oil to the hinge, or apply butter, but not cooking oil. I will share my process with you below, I hope it can help you.

1. The first step is to prepare sewing machine oil, cleaning liquid, paper towels, etc. for backup, see the figure below, go to the steps below.

2. In the second step, after performing the above operation, spray the door hinge with cleaning solution (i.e., the rust agent of the loose screws) from top to bottom to make the internal rust fully wetted, see the figure below, go to the following steps.

3. The third step, after performing the above operation, please wait for a while, you will see the rusty water flowing out, and then wipe it clean with toilet paper, see the picture below, go to the steps below.

4. In the fourth step, after performing the above operation, gently press the gap of the entrance hinge with sewing machine oil, each joint of the hinge must be clicked, and the left and right opening and closing doors should be repeated several times to make the sewing machine oil fully lubricate the door hinge, see the figure below, go to the following steps.

5. In the fifth step, after performing the above operations, repeat the door opening and closing left and right several times. Now, when the door is opened, the creaking sound is gone, see the picture below. In this way, the problem is solved.

Generally speaking, if there is a creaking noise in the security door, it means that there is a problem with the hinge of the security door at home. Because after the security door has been used for a long time, due to the humidity of the air or because some dust has entered the hinge of the security door, then there will be friction, and then there will be some noise.

You can apply some lube directly to its hinge, or you can apply butter. Then you open and close the door repeatedly to make the oil even. In this way, the creaking sound of the security door disappears.

If your door is like this, it is recommended that you go to the pharmacy and buy a syringe, suck the oil into the syringe, and use the syringe to oil the door, which is more accurate.

What should I do if the security door is closed and the hinge is particularly loud? Brother Wang taught everyone a trick, without spending a penny, it was easy to do.