-
Anonymous users2024-01-23When the back and lower handles are put in, you will feel the two plastic screws, and slowly unscrew them with the upper part.
-
Anonymous users2024-01-22I can't get into my hands, so I have to dismantle the toilet.
1 Find the screws, remove them with a handler, and replace them with new ones. Generally, the position of the screws is difficult to find, some can be seen, and some cannot be seen in the dark. The screw in the dark, usually on the side of the toilet bowl, opens the lid. >>>More
Each lid is secured by two screw holes at the back, bolted underneath the toilet bowl – you need to reach for it and remove it!
At the toilet near the tank, below. Touch it with your hands, there are two plastic screws. You can unscrew it by hand and unscrew the cap. The toilet lid is ready to be picked up.
The toilet seat screws can be removed by unscrewing it.
<> generally, there are two plastic screws on the left and right sides of the toilet, first remove one side, and then screw the white screw cap by hand, if it is too tight, you can borrow pliers and other tools to clamp it and unscrew it, and then disassemble the other side. Unscrew the screw cap, pick up the toilet lid with both hands, lift it up, the toilet lid will be removed, pay attention when tightening the screw cap, it is unscrewed to the right, and when lifting the toilet lid up, you should be light, and be careful to prevent the screw and empty wire nails from being stuck.