-
A hair dryer for blowing hair, turn on the hot air, and the glue should be able to be removed if it is soft, not sure if you can do it, I did it like this before.
-
Blow it hot with a hair dryer first, then unplug it.
-
Such a strong glue should be epoxy resin, dry and solid at one time. It is recommended not to take (use a Pu blade such as a kitchen knife and a hammer blade to no longer stick, buy another sticky nearby, so it also looks good.) I don't know if it's convenient to tell me what I bought or what is the name of the product? Thank you.
-
It's too bad to stick when you take it down! Buckle and buy a new heavy sticky.
Of course, the middle hook with the word "happy" is good, there is no problem, it is very auspicious, and it will be very smooth sailing, rest assured!
You can use floor tiles on the wall, or you can use glazed tiles; The hardness of floor tiles is slightly higher than that of glazed tiles, and their cost is slightly higher.
Collectively referred to as "sticky hooks" there are two kinds of self-adhesive and suction cup types, but the effect of hanging heavy objects is not good, there will be a phenomenon of falling off, it is recommended to go directly to a towel rack, which is a small expansion screw nailed to the tile, which is relatively strong.
If you are not afraid of the big taste, you can use the glue ba, which is relatively strong.
Can AB glue be fully pasted?
Although AB glue has a mild bonding, it is not as imagined for the mortar wall, because the mortar is not mirrored, it is rough, and the water absorption is also very large. >>>More