-
Anonymous users2024-01-23Find a small crochet needle (the smaller the better), or find a needle and bend it into a small hook, insert it into the key with the broken wing, gently rotate it 90 degrees, and slowly pull the hook.
If they are able to enter the room and look outwards and poke a wire straight through the keyhole room, the broken key will be able to poke it out (the keyhole is the same for indoor and outdoor keyholes).
Similarly, you can use another one to gently insert the key from the outside (be careful to be light, to avoid the broken key stuck too tightly and then drifting), it can be very successful, as long as the key is inserted (not reluctantly), you can find the wire from the outside to poke the root inside, poke off the key and go.
If there is a little bit on the outside, you can clip it out with nail clippers, and if it is broken inside, you can only call the lock cylinder to be unlocked.
As the saying goes, a key opens a lock.
The keys are of course different. Can you still call the key if it's the same? >>>More
After the security door key is twisted half a circle, it can be broken inside and can be clamped out with tweezers.
What to do if the cross security door key is broken in the lock: >>>More
1. Prepare a word, Phillips screwdriver, 2 pliers, 2 sewing needles, 1 tweezers, the first step, the sewing needle is bent into a small hook with fire red, and then gently find the place where the key is broken, find a movable gap, find a small copper pillar that can be moved, the lock can be locked, because the small copper pillar is stuck and the mechanism can not be rotated, now use two needles to hook the broken key, and slowly pull it out. It can be assisted by tweezers, if it does not work, it can be removed with a screwdriver, and in the position of the house, find the location of the broken key, and poke it out with a needle; 2. The key of the anti-theft door is broken in the lock, first see if the key is misplaced, the correct position should be the position where the key is inserted. Find a medical tweezer to try to take it out, if you can't get the tweezers, find a small groove in front of a bicycle brake wire; 3. Remove the back cover of the lock from the inside, and poke the broken key out of the lock hole with a narrow iron bar or a thin wire, and poke it out from the inside of the door; 4. If you have no way to solve it, you can only find a locksmith, and if the locksmith can't do it, you can only change the lock cylinder of an anti-theft door.