-
Anonymous users2024-01-23Generally use PVC material - this is the most widely used material at present!
-
Anonymous users2024-01-22If the main drain pipe of the bathroom is next to the toilet, not the back, the toilet drain must be selected for the side row, if you have to choose the rear toilet, then you must choose the lower part of the toilet that is not wrapped, so that the lower drainage hose can be bent over, otherwise the toilet can not be leaned against the back wall, and a large gap will be ejected, making the originally narrow bathroom space smaller.
2. In addition, when doing the ground, it should be noted that the drainage port of the toilet in the side row or the back row is 18 cm from the ground, and the drainage outlet of the toilet should be slightly higher than the drainage outlet of the main sewer pipe, not lower than the drainage outlet of the main sewer pipe, otherwise it is easy to drain poorly.
Nowadays, many of them use PVC pipes, and the age is not easy to say, but the quality is good for forty or fifty years.
In summer, it is better not to use a toilet mat, and it is more comfortable to sit directly on the toilet.
The toilet used to have a ceramic white toilet Now there is a better colored acrylic toilet, the two are completely different materials, the latter is better to use, better to clean, and has a longer service life. Li Cai sanitary ware is acrylic sanitary ware. >>>More
The moving distance of the shifter is generally 10 cm, and the thickness does not need to be calculated, because the toilet cannot be raised, and it cannot be installed if it is raised, so you can only dig a hole in the floor, dig it according to the height and size of the shifter, and dig it until it can be installed.
In general, the glue used for glass-to-metal bonding is mostly all-purpose glue. This glue has strong adhesion and is resistant to corrosion, high temperatures, acids and alkalis. If possible, soak it in toluene without affecting the metal; Alternatively, soak it in high-temperature water and allow it to soften and then cut it off with a blade. >>>More