What to pay attention to in the bedside table socket bedside table socket layout

The layout of the bedside table socket is inextricably linked to the placement of the bed at home, and in the process of installation, it can neither be installed behind the bed nor too close to the bed, otherwise it is easy to cause potential safety hazards. Therefore, we need to arrange the bedside table socket reasonably. >>>More

It's easier to install one.,Phone charging or something.。。

The height of the bedside table socket is designed according to the convenience of use, and the following design is recommended: 1. Reserved socket positions on both sides of the bed, and the distance between the socket and the left and right sides of the bed is about 20cm; 2. Move the vertical height of the socket to the top of the bedside table, such as 55-60cm above the ground. In this way, it is convenient to plug and unplug when using it in the future; 3. Two sockets can be designed side by side on each side. >>>More

Bedside table socket height: between 70-80cm.

Higher than the bedside table, lower than the bedside, the height of the bedside table is generally 55-58 Bu staring, so the socket position is set at 10cm higher than the bedside table, if it is the switch of the lamp, of course, it is good to separate from the socket, the switch position of the lamp is 1 meter, and the socket is about 30 cm from the ground, so as to be installed 5 to 10 cm above the bedside limb cabinet, so that the wall is inside, and the socket with a safety switch is made, so that it is safer. Type modification and. >>>More

The easiest way is to buy a multi-purpose plug (the socket is the best one that is flat, because some bedside tables do not have much space behind the bedside table, and the socket that is too high will be resisted), plug it in, and then plug in the bedside lamp and other plugs used. If you need to plug in more electrical facilities, it is best to plug in a multi-socket and connect it out, which can be more convenient to use. FYI.