-
Anonymous users2024-01-23It should be that the merchant is afraid of trouble so he finds a reason to scare you and wants you to change the plan. I think you're tall, too. If there is a 180+, the opening of 190 is indeed too low.
If the water in the friend's decoration is deep enough, you must insist on yourself and believe in your own vision. There are also many eyes to learn to say no, so that they will not enter the merchant's set during the decoration process.
-
Anonymous users2024-01-22All engineering quantity calculations in the industry are calculated by less than one square meter. You are squared. With such a small area, the merchant must be calculated by the full square.
As long as you can accommodate the door leaf to make several doors, you can make 1 door. If there is one fan as a whole, two expansion grooves can be used to prevent deformation. The production of the sliding door is very simple, as long as the upper and lower rails (now the upper and lower rails are only on the track) + the door leaf is connected with hardware. >>>More
The height you have to determine according to the height of your room, but also look at the other doors of your room to determine, at least the door within the range of the visible range is basically the same, for example, the door is 2 meters, but the kitchen door is meters, if you can see two doors at the same time, you will feel incongruous. Personally, I recommend that the rice is sufficient, and there is no need for the rice at all. >>>More
Professional suggestion: 3 doors are better, if your height and width have reached this size, it is recommended to make 3 sliding doors are more good-looking, and the stability is strong, plus a little beautiful door lattice decoration, it will show more high-end atmosphere.
Let's make four. Four of them made in my house. The two doors are fixed, and the two doors open to both sides, which is very good-looking, and it looks particularly spacious and bright after opening!
Hello, this size is just right to do a two-track sliding door.