Broadband in the living room how to change the signal to the back room autonomous broadband indoor r

Buy a wireless router and set it up.

Method 1: Normally speaking, the antenna gain is no problem for the wireless route to pass through one load-bearing wall, and it is no problem to pass through two load-bearing walls with better performance. Method 2:

Dual-band wireless routers with more antennas have single antenna, dual antenna, triple antenna and multiple antennas, generally speaking, from single antenna to dual antenna to triple antenna, the signal strength is arranged from weak to strong, of course, the price is also from low to high. In addition, there are single frequency and dual frequency of routing, single frequency refers to a single frequency, and dual frequency refers to two frequencies and 5GHz, which has stronger anti-interference ability and relatively better signal. Method 3:

The relatively common solution to the additional power cat is to use the power modem, which is a device that transmits network signals through wires, and is generally sold in pairs. The earlier power cat does not have the dial-up function, and there is no built-in wireless module, and can not be used independently, the router needs to be used together, one of them is plugged into the socket near the router, and a network cable is connected to the power cat from the router LAN port, and the other can be plugged into the room with a bad signal, and from this power modem, you can contact a wireless AP or wireless router as an AP, and the signal must be full. Method 4:

Use wireless extender Wireless extender is a device that relays the wireless signal sent by the wireless router through wireless mode, when used, the wireless extender can be placed in a relatively good signal in the middle position, and the wireless extender relays after receiving the signal of wireless routing, so that it can also receive a stronger signal in a more distant place where the original signal is not good.