-
Anonymous users2024-01-23If you need hot water in multiple bathrooms at home, you can install a hot water circulation system, and the end of the return pipe to return the water heater, so that the pipeline pump can facilitate the circulation. To put it simply, you can enjoy hot water bathing in any bathroom. The hot water supply pipe and the return pipe are arranged in the trench (or in the ceiling on the first floor), the water point is connected from the riser, the water supply main pipe should be set up with a reverse slope of not less than 3, the air in the system can be discharged with the water at the water point, and the main pipe can not be separately provided with the air release valve.
When all the cold water in the hot water pipe is circulated, the circulating water will automatically stop working, and then turn on the faucet in any place where there is hot water for 1 to 5 seconds and the hot water will come out directly. The cycle time is generally between 30 seconds and 2 minutes, depending on the number of bathrooms at home.
-
Anonymous users2024-01-22The water heater at the end of the return pipe needs to be circulated by a pipeline pump.
Take a look at the introduction of circulating water pumps sold on Taobao.
2 bathrooms are connected to the kitchen hot water circulation system!
The long distance between hot water pipes is like this, and there is no way to solve it! Even if the distance is shortened, there is also some cold water to be released!
As long as the traffic is enough, it can be, in fact, some people are already so safe. with 16 liters,
The tile has been pasted can only be pressed by the open pipe, although the open pipe is ugly but broken and good maintenance.