Ask for help from an electrician, the living room branch road trips after the range hood runs for a

Updated on Living room 2024-03-24
3 answers
  1. Anonymous users2024-01-23

    The power socket of the range hood is controlled by the switch of the branch of the back living room, and the tripping problem of the range hood may be caused by the reverse connection between the zero wire and the ground wire of the socket.

    In addition, according to the situation you introduced, the installation of electrical wiring in your home is not standardized; Therefore, it is recommended that you ask a professional electrician to give you a comprehensive inspection and confirmation of whether your home's wiring can ensure the safety of electricity, so as to avoid electrical safety accidents and ensure the safety of your home's electricity.

  2. Anonymous users2024-01-22

    Suspect no ground? You first connect a 3-wire (live wire, zero line, ground wire) of the row plug separately to connect the range hood, if it has been working normally, then there may be a problem with the kitchen line... A living room protector might be smaller than a kitchen?

    Or a controller with leakage protection? There is a slight leakage, so the protection is powered off. . .

    Find someone with an electrician's ID to check and see where there are any problems...

  3. Anonymous users2024-01-21

    How did you get it done in the end, my house is exactly the same as yours tripping

    Related questions
    The old electrician told you that the top suction or side suction type of the kitchen range hood is
    1 answers2024-03-24

    According to the current market sales, most users have begun to accept the side-draft range hood, after all, it is more space-saving, and it will look more beautiful. Therefore, the old electrician suggests that you try to give priority to the choice of side suction range hood, if the individual old kitchen, the exhaust equipment itself is very poor, and the kitchen area is small, and the machine with stronger adsorption capacity is needed, then it is recommended to install a top suction range hood.

    Seek help! The socket in the kitchen does not have a range hood
    5 answers2024-03-24

    1. The socket is broken, there is no electricity, and the range hood is not working. >>>More

    The kitchen fume is discharged directly to the wall through the smoke pipe of the range hood and a s
    1 answers2024-03-24

    It must have an impact on other people's homes, otherwise, people would not design a shared flue. If you do this, especially in the summer, when everyone has their windows open, and when you cook, people will smell it, and of course, it depends on the direction of the wind. In addition, the chimney emits not only smoke, but also oil, which will fall on the walls and windows of other people's homes, and people will definitely be unhappy and not worry about the possibility of complaining about you. >>>More

    Do kitchen hoods generally make cabinets?
    1 answers2024-03-24

    Generally, no, it is inconvenient to clean the cabinet, and if you can't do it, you can go to the ID home to see the renderings of Ha, it is a 360-degree panorama, and you will know if you look at the Ha case.

    The suction power of my range hood is not enough, and the kitchen is like a fire, and the smoke is v
    2 answers2024-03-24

    I don't think it's better to use it and buy a new one. Recently, I bought a large suction range hood from Sichen kitchen appliances, and when I opened it when I opened it, I basically didn't see the fumes, and it was sucked away as soon as it came out, so it was healthier.