The toilet I installed has a reserved water outlet, which is 35 from the wall on the right and 20 fr

Updated on Toilet 2024-03-22
2 answers
  1. Anonymous users2024-01-23

    The distance between the right side and the wall is too small, it is recommended to use a shifter to adjust the distance to 30 cm from the back wall and 40 cm from the right wall.

  2. Anonymous users2024-01-22

    The horizontal 20 cm is a little smaller, which will be inconvenient when using the toilet.

Related questions
Problems with the spout of the bidet toilet
2 answers2024-03-22

Haven't seen it. Probably not. Beg.

How to install the double spout at the bottom of the toilet
3 answers2024-03-22

Choose which drain to use, seal the other drain with a plugging material, put a sealing ring on the drain, glue the ground, fix the direction and make a circle of glue around the toilet.

How to fix the leakage of a large hole in the front of the old toilet lower than the spout (suspecte
5 answers2024-03-22

1. Make sure that the closing valve of the flush toilet is in the closed position. >>>More

When I was washing clothes in the house I rented, the water from the outlet flowed into the living r
2 answers2024-03-22

Hello! The floor of the bathroom is constructed with high-grade waterproof cement, which will not leak; The floor of the living room is constructed with ordinary cement and is not waterproofed. Therefore, if the water in the washing machine reaches the living room, it will leak into the downstairs ceiling or suspended ceiling.

When I rented a house to wash clothes, the outlet pipe flowed water in the living room, causing the
3 answers2024-03-22

It doesn't matter, the floor slabs are not waterproof.