How to detect whether the kitchen is leaking in a new house after the renovation has been completed

Updated on Kitchen 2024-03-12
2 answers
  1. Anonymous users2024-01-23

    Check through two aspects:

    1. Do a suppression test.

    If the pressure drop is less than MPa within half an hour, it can be regarded as no leakage of the water pipe, and the pressure test is qualified;

    2. Do a water storage test on the ground in the waterproof area.

    Before doing the water storage test, a waterproof embankment should be made at the door of the kitchen and bathroom, and the relevant sewer and floor drain on the ground should be sealed, and then the water should be stored for 24-48 hours to observe whether there is leakage. The main areas to observe are: whether there is leakage on the ground of the outer wall connected to the waterproof area, whether there are watermark stains on the top of the kitchen and bathroom downstairs, and whether there are watermark stains on the upper part of the outer wall and the top floor slab connected to the kitchen and bathroom downstairs.

  2. Anonymous users2024-01-22

    There are two main ways to check whether the kitchen and bathroom are leaking

    1. Do a pressure test on the water pipe to check whether the buried water pipe has the problem of pressure loss;

    2. Do a water storage test on the ground with waterproof treatment to check whether there is leakage.

    If your kitchen is not waterproofed, then do a pressure test check.

Related questions
1 answers2024-03-12

This is examined through two aspects

1. Do a suppression test If the pressure drop is less than MPa within half an hour, it can be regarded as no leakage of the water pipe, and the pressure test is qualified; >>>More

6 answers2024-03-12

1. Style: The inner door is the face of the entire home environment, and the consistency with the entire home design style is the basis for the selection of the inner door; 2. Door core board: in the solid wood grid keel, filled corrugated paper, frame filled with polyfoam, bridge and tunnel mechanical board, etc., the comprehensive ability of the bridge and tunnel mechanical plate is the best; '3, door panel and door cover: >>>More

1 answers2024-03-12

The most important thing is the paint, so let's take a look. The first is to look at the proof (toxic substance content); Second, look at the material (solid wood material); Third, look at the finish (shape and lacquer color); Fourth, look at the workmanship (whether the size is regular, tightly fitted). Only if you master these "four looks", you will not be unable to distinguish the true from the false in the labyrinth of doors. >>>More

3 answers2024-03-12

The washing basin can't be too short, it's tiring to bend over to wash dishes, and 900 is not high. If the height of the stove and the washing basin is the same as the overall countertop, the height should be considered comprehensively, and the height of the pot stir-fry should be considered if you are not tall. It's also a good idea to try whether the height of the 900 stove is appropriate.

7 answers2024-03-12

Hello, I'm doing design in Nanjing, first ask your kitchen cabinet is still tiled, if not, then it's normal, second, your kitchen cabinet is not behind the back panel, directly leaning on the tile, that's normal. >>>More