How do you get an Asus router Atomic wired backhaul? The main route is in the living room, and the s

Updated on Living room 2024-03-29
1 answers
  1. Anonymous users2024-01-23

    There's no need to worry about network cables, as Aimesh ASUS routers are designed to set up an extended WIFI network for seamless connectivity.

    As long as the main router is connected to the main broadband interface of the home, such as the living room, and the secondary router is placed in the bedroom, as long as there is a power outlet, there is no need for a network cable. Because the main and secondary routers are originally connected to each other through wireless, and if there are multiple secondary routes, the coverage of WIFI can continue to be expanded.

    I don't know what you mean by "wired backhaul", but if you're using a similar wired broadband, then it doesn't matter.

Related questions
2 answers2024-03-29

It can be connected like this. However, the network cables in the living room and bedroom are connected to the weak current box, usually not directly connected, and the two network cables need to be connected in the weak current box or through a switch.

1 answers2024-03-29

Is there no network in the route or only the computer has no network, you just put 1 meter and 10 meters to change a position, this should not be able to go online, first see if the network cable is plugged in, sometimes there is a possibility, that is, the crystal head of the network cable is not done a little problem, plug in this is normal, plug in a different place may not be in good contact,

3 answers2024-03-29

Buy a repeater and install it in the living room, and connect the wifi wirelessly. >>>More

11 answers2024-03-29

If you want to use wireless Internet access, you have the wrong connection, you should have a wired LAN connected to the wireless WAN, the wireless WAN is set to dynamic, and the LAN setting is not the same IP as the wired.

4 answers2024-03-29

A: Yes.

Connect your computer directly with your second router first, enter with the IP address behind the router, there is an account password behind it, if you don't know, you can reset the router, change your router IP to the last digit of the first router after entering the router should be 1), the previous xxx is the same as the setting of your first router, turn off the DHCP in this router, and then connect a network cable from the LAN port of the first router to the LAN port of the second router. >>>More