-
Anonymous users2024-01-23Hello! The whole shower room does not work after being energized, and it is a problem with the wiring. Check the line after using it.
-
Anonymous users2024-01-22The overall prevention does not work after power-on, it may be that you are connected to the wrong circuit.
-
Anonymous users2024-01-21It may be that the power cord is in poor contact.
-
Anonymous users2024-01-20That's still where the problem is, find a repair one to see.
the whole bathroom=all the bathroom
The brand of Dove is OK, the cost performance is quite high, you can compare it more. >>>More
It may be affected by the humidity of the environment, and the contact may be poor, and it is also possible that the line is aging. It is recommended to consult and repair the brand manufacturer.
Check the hose first Some hoses of poor quality will rust at the joints after a long time, which will block the hose, but the pipe will not pass. Secondly, check whether the float in the toilet tank has become unsmooth because of the water alkali.
The installation of the water retaining line of the shower room, after adjusting the size, can be glued with glass glue, but both sides of the water retaining line are all the places that are in contact with the wall or the ground must be beaten with glass glue, and there can be no gaps, and after the glass glue is laid, it can not be moved, it must be protected, and it can be used after 24 hours.