-
Anonymous users2024-01-23If the flush is broken.
Disassemble it, and pull it up if you can't get up the float control, and then adjust the position.
It's hard to fix it yourself and find a specialist.
Dig a pit according to the size of the squat toilet and connect it with sand and cement. >>>More
If it's a long stream, it's easy to fix. At the other end of the float, that is, at the junction with the outlet end of the tap water pipe, that is, at the other end of the float there is a rubber pad that acts as a seal. Due to a long time, it may be that the aging elasticity is not enough or wear, in a word, the sealing is not tight, resulting in the inability to block the water flow of tap water, so the flow of water is long. >>>More
There is a certain degree of difficulty, if it is replaced with a trap, like the one on the left, the first thing to consider is the connection of the pipe and the interface between the pipe and the toilet, as well as the sealing of the floor, if it is not handled well, it may leak and affect the lives of the residents downstairs. Secondly, there is a possibility of a blowout when the pipe is disconnected, because you can't live on the top floor, and even if it doesn't blow out, it is still possible to flow outward sewage. In addition, the diameter of the drain pipe of the toilet is relatively large, as shown in your diagram, there is not enough space for the replacement water trap.
Slight blockage can be solved with a toilet picker, more serious cases, it is recommended that you go downstairs to post a small advertisement to find a professional dredging master to get it, 50-100 yuan on it. >>>More
If it's not serious, try the toilet drawer.
If it's serious, try a hand-cranked tool. >>>More