After flushing the toilet, filling water is particularly slow? What to do?

Updated on Toilet 2024-03-12
2 answers
  1. Anonymous users2024-01-23

    There is a problem with the switch of the water inlet, fix it or replace it with a switch.

  2. Anonymous users2024-01-22

    Find a repairman, check it first, and see if the toilet basin inlet is blocked, or the water pipe is aging and blocked, and you can repair it in a targeted manner! It doesn't cost much!

Related questions
2 answers2024-03-12

It's blocked, as long as it's not a big thing. Buy a special dredge toilet, and it will be done quickly

1 answers2024-03-12

It may be that the water in the toilet is broken, you can go to the bathroom store and ask about the sale and buy a replacement.

26 answers2024-03-12

1. First clean the toilet bowl and drain the water in the tank (suck it out again and again with a rag and wring it out), in order to avoid dilution after the hydrochloric acid is poured in. >>>More

3 answers2024-03-12

Causes and solutions for slow toilet drainage.

The toilet is generally blocked at the trap (S), you can use a 3 cm hose (because the hose is soft and hard), one end is inserted into the faucet, and the other end is inserted into the toilet trap (S), it is best to plug the trap as much as possible, and then open the faucet to rinse, and then pump the hose back and forth with your hands, it is best not to be afraid of smell, afraid of dirty, if necessary, you also need to use your hand to reach into the trap to insert the water trap (S), the time is until it is through, this is the easiest way. >>>More

3 answers2024-03-12

The toilet is something we use every day, and once it is clogged, it is very troublesome, so it is good to dredge it in time. The toilet unclogging methods that are often used are: >>>More