The shifter that used to be installed in my toilet is now blocked and I have to remove it. What shou

Updated on Toilet 2024-03-02
4 answers
  1. Anonymous users2024-01-23

    The shifter will make the toilet drain smaller and it will be easy to block in the future It is recommended not to use this thing, a wallpaper knife is cut along the bond between the toilet base and the floor tiles Because now the toilet is generally glued directly to the ground with glass glue, so it is very good to go, and then push and pull the upper part of the toilet from one side, and after uncovering the toilet base, you will see the shifter and take it down.

  2. Anonymous users2024-01-22

    The new product "porous wildcard water-saving toilet" can clean the toilet with only a cup of water, tested by the national standard, the sewage replacement rate is 100%, and it also has 8 significant characteristics that are leading in the same industry in the world: 1. Only one liter of water is used each time, 2. Only a glass of water is used when the water is stopped, 3. Long-term use does not return to the smell, 4. Brushing can be completed at one time, 5. The foot switch avoids infection, 6. The bacteria, poison and insect odor are completely isolated, 7. One-way reverse is not reversed, 8. The pipeline pit distance can be wildmatched.

  3. Anonymous users2024-01-21

    Have you ever wondered what to do after removing the shifter? Report the actual pit distance of your toilet.

  4. Anonymous users2024-01-20

    If you want to remove the toilet, you will be annoyed to see the shifter, and you can take it down directly.

Related questions
1 answers2024-03-02

Disadvantages of shifters:

After installing the shift, it is easy to cause the toilet to clog, and after installing the shift, it is easy to cause backflow due to the increase in curves and the air pressure. >>>More

1 answers2024-03-02

The greater the distance the toilet shifter is generally displaced, the greater the slope. Therefore, the installation of the shifter should be before the floor tiles, some should be planed down the ground or raised the ground, and some of the lifts should not have many floor pads, and the place where the horizontal drainage can be carried out is relatively narrow (the general channel is flat). However, if it is only moved by 5 cm, it does not matter much, and the ground drain is 10 cm, which is equivalent to staggering half of the mouth.

3 answers2024-03-02

The lower row of the toilet shifter is not smooth and easy to clog, so try not to use it.

5 answers2024-03-02

The shifter is a method that must be used when the toilet hole distance is misaligned, and it will definitely have a certain impact on future use after installation, which is relatively easier to clog and dredge up, so you must be careful when using it.

2 answers2024-03-02

This has nothing to do with the shifter, you press it when you flush it, and the water will bring the plug down when flushing down, so it does not leak, if you press it for a long time and do not let go, the plug can not be brought down with the water when the water is flushed, so it is easy to leak, and you need to press the plug again to reset.