What are the steps to replace the bathroom bomb and readjust the installation position?

It is more troublesome to readjust the installation position, take all the buckle plates of the trouser argument bird ceiling down the stove beam, re-punch and fix the bath bomb at the top, wiring, and then install the buckle Hu morning plate according to the position of the bath bomb.

The integrated ceiling is easy to change. It's not hard. Tear down a piece and change the position.

If Lu Min is an old-fashioned buckle, take the acres to find a carpenter, reopen a hole, and eliminate Xisen to make up the old hole.

If you want to replace the bathroom bomb and readjust the installation position, the specific steps should be described separately according to different ceiling materials:

1. Integrated ceiling material:

Because it is a combination of block materials, you can disassemble the board in the predetermined position, move the bath bomb over, and replace the removed plate in the original position. This is the easiest structure to change the position;

2. PVC and other strip plates:

If you want to change the position of the bath bomb, you need to remove all the panels on the side of the post-installation, relocate the bath bomb, and reinstall these panels. And it is necessary to add several plates of equal length (because the opening position may be different, the original cut off plate may not be usable). There may be a color difference between the used board and the newly purchased board.

You need to be mentally prepared in advance.

Other Notes:

1. The relocation may hinder the skeleton structure - it needs to be reinforced;

2.If the plate is a parquet shape, the number of supplements may be increased;

3. When lengthening the power cord, be sure to handle the interface well. High power use, prone to problems. It is recommended to do the welding treatment.

It is troublesome to readjust the installation position, take down all the ceiling gussets, re-punch and fix the bath bomb at the top, wiring, and then install the gusset according to the position of the bath bomb.

If it's an aluminum gusset, the gusset is stuck on the keel, and you can use a nail to get tired of it on the corners of the gusset.

The integrated ceiling is easy to change. It's not hard. Tear down a piece and change the position.

If it's an old-fashioned gusset, find a carpenter, reopen a hole, and repair the old hole.

The gusset plate can be sucked and pulled down with a suction cup, and you can buckle wherever you want, as long as the wire is long enough.

You should first screw the whole bath bomb panel to take.