-
Anonymous users2024-01-23When the toilet flushes, it is obvious that the water is not leaking fast enough, or very slow, or it is full all of a sudden, and it will slowly leak down after a while, which means that the toilet is blocked, but it is not completely blocked, and this situation should be dealt with as soon as possible, otherwise there will be the possibility of blockage.
When flushing, the water must be ventilated into the sewage pipe, that is, one in and one out, but when flushing, the air only enters and does not come out, which will cause the water to flow very slowly in the seat, either the air hole of the sewage pipe on the floor is blocked, or the master has changed the underground sewage pipe when making the pipe. >>>More
The smart toilet seat person did not sit on, and the flush water was very high, what is going on, are you talking about the situation in the picture above? >>>More
The structure of the toilet is not straight, and there is a trap below (similar to a kimchi jar to prevent the smell from flushing up), plus the ceramic is heavier, the water is not large enough, and the flushing power is not enough, and it may still be in the trap now, in order to avoid future troubles, it is better to take it out by hand.
This is best to find a one on 58.com, which is the fastest way.
No, I put something in it, and it smells.