-
Anonymous users2024-01-23When you suck milk tea, if the straw is smooth and in close contact with the film, is it more laborious to suck? You plug the hole, the inside is sealed, and the air pressure in the air above is getting smaller and smaller after the underwater flow, and the air pressure outside is large, of course the water will be topped, and the effect will definitely not be good. The hole is designed to keep the pressure difference between inside and outside, and the water naturally gravitationally drops.
-
Anonymous users2024-01-22The flushing of the toilet is a flushing process formed by the small hole in the toilet circle and the large hole at the bottom.
Generally, toilets with these two small holes are siphon-type. In order to increase the siphon force. If there is frequent water leakage, it should be caused by the wear of the rubber ring at the bottom of the water tank or the misalignment of the rubber pad, the sealing is not real, or the float valve is too high.
The small button is the small punch button, and the large button is the big punch button. The two buttons were designed for the purpose of saving water. >>>More
You remove the lid of the water tank and press it directly with your finger, if the water can be flushed properly, it is not broken. Then adjust the direction of the button on the lid, and it should be easy to press in the future.
It is the leakage of the sewer in your house, you can wait for the water to run out of water with pure cement to plug the hole.
One is the ability to judge the gesture of stool in the small digging, and the other is the function of rushing to stool, in order to save water. >>>More