-
Anonymous users2024-01-23At the back of the toilet, on the bottom surface of the plane, there is a screw on each side, unscrew this screw female counterclockwise, lift the toilet lid up and take it off, if the screw is rusty, then you can only use the hacksaw blade to sawn off the --- from the upper plane of the toilet
-
Anonymous users2024-01-22How to remove a domestic toilet seat.
-
Anonymous users2024-01-211.Stand up the toilet lid Stand the toilet lid upright, generally speaking, there is a screw on both sides of the toilet lid for fixing.
2.Loosen the screws Once you have found the screws, use a screwdriver to loosen the screws in the opposite direction, and when they are loose, you can easily lift them up and remove them.
3.One-piece toilet If it is a one-piece toilet lid, you only need to unscrew the set screws on the back of the toilet.
Not necessarily, if it affects the disassembly and assembly of the toilet seat fixing bolts, it must be removed.
Just disassemble it as you would normally dismantle other faucets, and turn the wrench counterclockwise through a gap at the root of it.
Below the back of the toilet, there is a bolt on each side, and the decorative cap is removed from the decorative cap and the screw is removed, and the last bolt is removed when it is stable and not let go, and the bolt nut is pulled outward
Generally, if you choose a more reliable intelligent manufacturer, you will have after-sales service to introduce you, and it is recommended to choose Royalstar.
Toilet seat option one.
Nowadays, the length of the toilet lid is basically more than 50 cm, but many toilet seats have reached about 52-58 cm, and the length of the inner diameter of the seat corresponding to the size of the toilet lid is basically about 30 cm, and when we buy the toilet lid, we can measure the length of the toilet bowl to the front tip of the water tank along the center line of the toilet, which is generally more than 50 cm. >>>More