-
Anonymous users2024-01-23You can re-screw it.
Or leave it alone, it will block itself in a few days.
Because there are impurities in the water.
-
Anonymous users2024-01-22Get that waterproof tape all over again.
-
Anonymous users2024-01-21Add a circle of waterproof tape and it won't be.
It's the same.
But note the following: >>>More
Left and right, as long as the braided hose is long enough to be connected to the toilet, the toilet is generally connected to only one cold water pipe, if you have a hot and cold two outlets, do not divide the left and right only to connect the cold water pipe, in case you mean that the right is the hot water pipe you want to connect it is not very good, a flush on the gas waste gas bill, in case of some hot water flushing toilet that smell who knows.
Just disassemble it as you would normally dismantle other faucets, and turn the wrench counterclockwise through a gap at the root of it.
The angle valve is leaking, change the angle valve or change the spool.
The angle valve can only be moved to make an open pipe, and the washing machine will not be able to lean against the wall, but it will be much better.