-
Anonymous users2024-01-23Grey water is not used in the wash basin and shower.
1. Reclaimed water refers to domestic wastewater, but it is different from sewage, which is recycled in relatively clean sewer such as bath water or vegetable washing water.
2. Because reclaimed water is a kind of reclaimed water, it is usually only used for flushing toilets (some also use it), and tap water is used for wash basins and baths.
-
Anonymous users2024-01-22Because grey water is a kind of reclaimed water, it is usually only used for flushing toilets, bathing, etc.
-
Anonymous users2024-01-21Reclaimed water refers to domestic wastewater, but unlike sewage, it is recycled in relatively clean sewer such as bath water or vegetable washing water.
-
Anonymous users2024-01-20Reclaimed water refers to the clean water after simple treatment by the community, which can only be used to flush the toilet, and the wash basin and bathroom cannot be used according to the design standards, but the developer does not necessarily do it, you had better check the pipeline. Give it a go!!
-
Anonymous users2024-01-19Usually only toilets are used, but some floors are also used
-
Anonymous users2024-01-18The latter should be cleaner than the reclaimed water.
Prepare cleaning tools such as rags, detergents, and small brushes. Since the plug ring on the surface of the sink basin is the easiest place to hide garbage, if there is garbage, use a clip to pick up the garbage first; Then clean the surface of the washbasin, wring it out with a rag and detergent and wipe it carefully; The plug ring of the drain cannot be wiped with a rag, so you can use a small brush and detergent to brush it. After cleaning, take care to wipe the surface water stains clean with a dry rag. >>>More
1. Bathroom wash basin size.
Bathroom basin size. >>>More
<> The minimum installation size and width of the toilet wash basin should be about 550mm. Many homes have small sizes, and in order to save space, the width of the sink will be reduced, but even if the width is reduced, it cannot be smaller than 300mm. In addition, a space of 1100mm should be reserved on both sides of the wash basin, i.e. 550mm. >>>More
Regarding how high the washbasin in the bathroom should be from the ground, I personally think that when making a washbasin, in order to prevent the washbasin from splashing on the wall next to it when it is in use. Therefore, it is necessary to do a good job of waterproofing the wall before installing a washbasin. Generally, the distance between the bathroom and the ground should be 80 or 85 cm.
The bathroom and wash basin on the right do not indicate how good your store's feng shui is. >>>More