-
Anonymous users2024-01-23The reason for this situation is that the bottom of the small cabinet is unbalanced, you can try to use a thin wooden board to raise the front legs of the small cabinet.
-
Anonymous users2024-01-22It may be that the cabinet is not placed flat and the front is too low, so you can try to raise the feet in front of the cabinet.
It may also be that the slide of the drawer is not installed horizontally, in this case, the slide can be removed and reinstalled, and try to maintain a certain slope of the slide high in front and low in the back.
-
Anonymous users2024-01-21In the same place where it is closed, place a small magnet on the counter and a small magnet on the door, just suck it up slightly.
1. Bathroom wash basin size.
Bathroom basin size. >>>More
<> The minimum installation size and width of the toilet wash basin should be about 550mm. Many homes have small sizes, and in order to save space, the width of the sink will be reduced, but even if the width is reduced, it cannot be smaller than 300mm. In addition, a space of 1100mm should be reserved on both sides of the wash basin, i.e. 550mm. >>>More
Regarding how high the washbasin in the bathroom should be from the ground, I personally think that when making a washbasin, in order to prevent the washbasin from splashing on the wall next to it when it is in use. Therefore, it is necessary to do a good job of waterproofing the wall before installing a washbasin. Generally, the distance between the bathroom and the ground should be 80 or 85 cm.
After this problem occurs, you need to stop using the bathroom immediately, and contact the property or maintenance personnel to change the sewer pipe to a U-shaped pipe, so that there will be no odor.
Turn off the main switch.
It's okay to change it. >>>More