How to disassemble the bathroom door and how not to install it back

Updated on Bathroom 2024-03-03
2 answers
  1. Anonymous users2024-01-23

    Look at your ceiling is PVC

    Plate or aluminum gusset:

    Board: The last piece of the general closure is on both sides, you can push the piece on the side with your hand, if you find that the loose piece is the last piece, so that you can take it down in turn, pay attention, some of the middle may also be fixed with screws, use a screwdriver to unscrew the screws, you can remove all PVC, remember the order of the PVC board when dismantling. When installing, just follow the reverse of the removal.

  2. Anonymous users2024-01-22

    According to the program when you disassemble it, turn the program upside down, and install it.

Related questions
How to disassemble the bathroom ceiling, how to disassemble the bathroom ceiling
5 answers2024-03-03

First, take out the blade and insert it into the gap at the edge of the ceiling panel, as shown in the figure below >>>More

What to do if the bathroom door is cracked
2 answers2024-03-03

Morning meeting carpenter to work relatives or friends. Put some glue on the wood in the gaps. Put the door frame back in place. It's OK without sewing. If there is no such person, just spend some money to fix it. These are all small things, and those who will not be difficult, but those who are difficult will not.

What to do if the bathroom door won't open
3 answers2024-03-03

Hit it hard and it will open. It's a way of sabotage, though. After that, it will be repaired.

What should I do if the bathroom door can't be opened?
4 answers2024-03-03

The lock heart was removed, the bedroom door was closed before, and the lock company was found for 50 yuan. Of course, it also depends on the type of lock you have. If you can tighten the lock core, do this, first screw out the screw that fixes the lock in the door, take out the lock at the back of the door, and then take out the lock surface of the front panel, and then you may disassemble the lock cylinder, I hope to help you solve the problem.

The bathroom door was slanted by the master, what should I do
5 answers2024-03-03

Summary. Kiss! Hello, happy to answer your <>

The pro-method is as follows: First of all, you need to check why the door is tilted, and some may be loose screws of the hinge, as long as the hinge screws are tightened. However, if it is tightened, it will tilt, so you need to remove all the screws and align the angle of the door. In some cases, the bottom may be deformed due to the sinking of the bottom, and the screws need to be reinstalled and fixed by the expansion screws. >>>More