What to do if there is a leak in the kitchen

Didn't do waterproofing when decorating, there should be a place to go into the water. No way, find a master to repair.

Here's how to leak water in the kitchen:

1. The solution to the leakage of water pipe joints

> kitchen leak If the pipe joint itself is broken, you need to replace it with a new one. If there is a water leak at the wire opening, remove it and replace it with a rubber pad, apply thick white paint to the silk opening, and wrap it around with a special ribbon.

2. The solution to the leakage of the sewer pipe

If it is a PVC water pipe, you can go to the store and buy a new PVC water pipe for bonding.

The specific way to solve this kitchen leakage problem is to put the interface into one end of the pipe first, cut the position flush with the other end, straighten it and send it directly to this end, so that both ends have a certain cross distance (length) and then disassemble it, and apply PVC glue to the inside of the two ends and the outside of the two sewer pipes.

3. The solution to the leakage of plastic pipes

First, use a small hacksaw to see off the leak - the saw edge should be flat. Use sandpaper to lightly sand the newly exposed port, not too much. Apply to the port with a special glue and let it dry for a while:

At this time, glue is applied to the inside of the "bamboo" joint. After everything is OK, apply an appropriate amount of glue to the seams to ensure that there is no leakage.

4. The solution to the leakage of the iron pipe

Such a kitchen leakage is caused by the corrosion of the overall water pipe, close the main valve of the water pipe, replace the whole section of the water pipe, and put the two ends on the screw buckle and screw it on.