I want to install a bathroom in the basement, there is no sewer pipe, is there a way to solve it?

Updated on Bathroom 2024-03-20
4 answers
  1. Anonymous users2024-01-23

    Basement bathroom drainage personal recommendation to use Jinlijie brand sewage lifter, you can buy your own to try, this sewage elevator it is especially suitable for basement or garage or toilet underground domestic sewage discharge. The installation of the Golden Tie Sewage Lifter is very convenient, and the operation is simple and the footprint is small. And the material is made of stainless steel, so the service life of the product is guaranteed.

  2. Anonymous users2024-01-22

    Generally, the basement installation of toilet drainage will not be retained, and the sewage pool is directly installed using a lifting pump to complete the sewage discharge, and the installation of the sewage pool does not require a pipe.

  3. Anonymous users2024-01-21

    Answer: There is no sewer in the basement can be added to the sewage lift pump or electric toilet, the device can be connected to the toilet, wash basin, shower, washing machine, floor drain. It can be connected to the main pipe on the roof of the building to make a U-shaped bend, and then the water supply pipe is safe and a special one-way valve for sewage, and the machine itself also has a one-way valve. When the toilet water pipe is installed, the general water pipe goes to the top and does not go to the ground, the cold and hot water outlets must be horizontal, generally the left is hot and the right is cool, the pipeline is laid to be horizontal and straight, and the layout direction should be safe and reasonable.

    The position of the pipe clamp and the slope of the pipe should meet the requirements of the specification. All kinds of valves should also be installed in the correct and flat position, which is easy to use and maintain. When slotting, the depth of the groove needs to be checked, the cold and hot water pipes cannot be the same tank, and the cold and hot water pipes must be installed into the wall.

    When installing the water heater inlet and outlet, the water inlet valve and the air inlet valve must be considered and installed in the corresponding position. The water pipes are basically from the roof, because this can reduce the probability of man-made damage, and the interface and outlet of the hot and cold pipes must be parallel, usually the heat pipe is on the left, and the cold pipe is on the right. When Shangqiu Decoration Company designed, the entire pipeline should be avoided as much as possible, and the position and slope of the pipe clamp should also meet the requirements, and each valve should be installed flat for future use and maintenance.

  4. Anonymous users2024-01-20

    It is possible to use a rear toilet with a wall-hung toilet, and with a sewage lift pump, it can be connected to a wash basin, washing machine, shower, etc., and then connected to the main sewage pipe on the ceiling of the basement by pipes.

Related questions
5 answers2024-03-20

For the problem of no water in the basement, it is generally solved by a sewage lifter, such as a common basement bathroom, we can solve it through a toilet sewage lifter like microboy. This solution has the following advantages: the first is the low cost of civil construction. >>>More

8 answers2024-03-20

Lifters can be installed, according to the requirements, such as the temperature, flow, head, etc. of the required drainage, the household ones are Denmark, Italy, Germany, and there are also Shanghai Green Rings, according to the use and economic strength of the purchase price, about 10,000 yuan in Germany, five to six thousand in Italy, four thousand in Denmark, two to three thousand in Shanghai, I just bought two Italian ones.

14 answers2024-03-20

Consider using a U-shaped anti-suction pipe to prevent odors and prevent sewage from backing up. In addition, the waterproofing of the bathroom in the basement must be done carefully, and there can be no leakage, otherwise the whole will be very wet.

2 answers2024-03-20

1.The use of "well + pump" form mainly includes the cost of civil engineering and equipment installation engineering, earthwork excavation, steel bar binding, formwork, concrete pouring, waterproofing and slide rails, pump installation, and the entire construction period is about 15 >>>More

2 answers2024-03-20

If the indoor conditions permit, you can consider using a mobile machine called "water lifter", if you don't know this kind of machine, you can consult the older people in the countryside, more than 30 years ago there were many such agricultural machinery in the countryside, they will know that this kind of agricultural machinery used to lift water from the well to irrigate the farmland, of course, now there is no use I am afraid that I can't buy it, I can only find a way to make it. It is recommended that you use this tool to extract sewage from the basement, considering that you do not use tools such as pumps, even if it is manufactured, it is not troublesome, the parts that are not easy to manufacture are sprockets, chains are ready-made for sale, trays, brackets, etc. are very good for processing and manufacturing, I think this is very ideal, the biggest advantage is that blocks such as feces are not easy to block, because the ring chain is continuously extracted, there is no residue in the barrel, only very little remains at the bottom of the sedimentation tank.