-
Anonymous users2024-01-23At the palace gate, if Inner Mongolia wants to adjust the flat band, he needs to disassemble his shooting gold first.
-
Anonymous users2024-01-22Method: Press the screw on the bow head to let the clamp position open, and then put the rubber band in.
-
Anonymous users2024-01-21You can find a professional to help with the installation. Or find a manufacturer to install it.
-
Anonymous users2024-01-20Take a look at the instructions and follow the steps in the instructions.
-
Anonymous users2024-01-19The small bow door flat skin bow is only suitable for short drawing distance, and the medium and large drawing distance rubber band surface will be close to the face, which is easy to cause the phenomenon of pumping the face! Most of the small bow gates are equipped with gun sights, and their characteristic is that when you think the aim is accurate, it will actually hit high! It's only when you see the crosshair ghosting that it's really centered!
Otherwise, the rear hand positioning must be raised with high pressure and low ballistics! In addition, it is very unscientific to add that the so-called two-point-one-line three-point-one-line gun sights are used on slingshots! The two-point one-line positioning of the slingshot is the two points between the back hand and the slingshot bow door, not the two points above the bow door, and if there is a problem with the positioning of the back hand, you just put the sniper magnifying glass on the bow door is useless!
-
Anonymous users2024-01-18I think it's a very difficult thing to understand how my grandfathers went about installing rubber bands.
There is a little Lu Ding Weibo above the grandfathers, and there is also a small one over there. A connection between the two can be used to install rubber bands.
The security door is located at the main entrance, and in the event of an emergency, it is easier to open it outward, but if it is opened inward, it is very annoying to let the door open the position first. That's why it's more open to the outside world.
According to the Code for the Calculation of the Construction Area of Construction Projects issued by the Housing and Urban-Rural Development Commission in 2013, the inner balcony of the main structure and the outer balcony of the main structure are mainly judged to see whether the balcony is surrounded by load-bearing walls. >>>More
You follow a principle, that is, the outdoor unit is to exchange heat with the outside, which means to transfer the heat from the house to the outside of the house. At the same time, you also need to consider whether the ventilation in your balcony is smooth, otherwise it will affect the heat exchange effect, cooling in summer and heating in winter.
According to the relevant regulations, the balcony refers to the space for users to carry out activities or dry clothes, and the floor area of the balcony is calculated according to 1 2 of the horizontal projection area of the period. >>>More