Liangmeike whole house bathroom decoration is better to choose tiles or floor tiles

The wall and floor tiles in the bathroom are matched. When leaving the factory, the manufacturer has configured the corresponding wall tiles for each kind of floor tile.

So just choose the floor tiles.

The usual practice of wall pressing is that the wall is reserved for the size of a brick from the ground, and then paved along the wall surface. After the floor tiles are laid, a wall tile is pressed on the floor tiles to pave. to achieve the result of wall pressing to the ground.

The advantages of wall pressing the ground are: good looking, small gaps, and good waterproof effect.

If the floor tiles are pressed against the wall tiles, the water on the wall will seep down the gaps to the dry ash layer of the floor tiles, which may cause: mold in the dry ash layer;

The moisture extends along the dry ash layer to the floor at the door of the bathroom, causing the floor to deform and bulge.

The disadvantages are: when the wall bricks are paved, you need to knock on it, the cement will sink a little, resulting in a little empty above, usually you have to fill some cement from above, and the bottom row of bricks can not be filled so densely at the end, and it is easy to produce hollow drums at the four corners. Since the bathroom needs to be paved with a slope, the bottom tile needs to be cut brick.

And cutting bricks can not be guaranteed to be very neat, so the visual effect is not good-looking. Another is time-consuming.

The ground pressure wall refers to the wall bricks directly from the bottom to the top, without reserving the position of a brick, and the floor tiles are paved against the wall tiles.

The advantages of the roof wall are: the bottom tile will not produce hollow drums, and the visual effect is good-looking;

The disadvantage is that the joint between the floor tile and the wall tile is large, and the waterproof effect is not good.