Marco Po Roman barrel, for some reason suddenly no water, what to do

How to deal with the toilet tank without water ingress: 1. Open the main valve [also called the angle valve] to determine whether there is tap water. 2. Open the lid of the water tank and observe that there is no water on the water tank.

Whether the piston can be plugged. If you can't plug it, it will leak, and the water tank is not up to the switch, so you won't get on the water. 3. The toilet tank accessories are divided into three parts.

The first is that the drain valve is directly below the button, and the second is the inlet valve, which is the part of the hose connected to the outside of the water tank, which is generally next to the drain valve. The third part is that the buttons are divided into full-row buttons and half-row buttons. 4. Close the toilet lid and check whether the button can reach the inlet valve, if it is, adjust the inlet valve to the position, and then see if the float or float of the inlet valve moves up and down freely.

If you get stuck, the water won't get in. Generally, there are adjustable crosseyes on the pontoons in a clockwise direction.

Twist it and see. If the float is suspended in the air when there is no water, it means that it is broken and the water inlet is blocked. 5. Fill the water tank with water to see if the pontoon can float freely.

If the problem of water inlet is solved. Then there is the problem of drainage, which is also the problem of flushing. See if the plug of the plug in the tank, also called the float, is damaged.

Whether the float and button connection are loose. If it is loose, you can check whether the button is elastic, and it is easy to rust when the spring enters the water for a long time.

Of course, the float is too high and has to move down, because the water pressure is too high; Or it is the water inlet, there is a foreign body, resulting in the water can not be sealed, there is running water, and after a long time, the toilet water level is high, so that it continues to leak. Method: Rotate the water inlet control lever of the toilet counterclockwise, clean the foreign object, and then screw it clockwise. Yaguang Ya experts reminded that if the toilet still keeps coming out, the tank accessories are broken, and you can just change the accessories.

1.In fact, it is also simple, and the situation of less water from the faucet is a problem. Even the better toilet bowl has a filter inside, and the filter is blocked by too much limescale for a long time, so that the tap water cannot come in. As long as you can remove the filter and clean it, you can do it.

2.Close the valve on the hose that connects the water inlet to the tank, or it will be a while. Flush the toilet again and drain the remaining water from the tank.

3.Along the water inlet hose, look at the bottom of the toilet, there is a hexagonal nut to connect the hose and the water refiller in the water tank (a standing plastic pipe) together, turn the nut with a wrench, and then look up along the position of the nut, there may be a nut in the same position, the same turnable, the same function of the rising, also unscrewed, my family is plastic, I don't know what else is the same as this. After two processes, the water replenisher can be removed from the inside of the toilet.

4.Remove the water replenisher, see that there is a small square column in the middle of the inner tube, and pull it out with needle-nose pliers, you can see that the square column and the filter are one, and they come out together. 5.

Use a waste toothbrush or something to clean the filter. It's better to have a scale cleaner, no and it's not a big problem, I just use the scale remover to soak the filter for a while, it is very clean, you can also pour some of this mixture into the water filler, you can also remove the scale inside. All cleaned.

6.Finally, it can be installed back as it is.

If you follow the above methods, you will definitely be able to solve the problem.

The question is not on the water at all, and all of a sudden, it shouldn't be blocked.

If it's blocked, he won't get into the water.

If it is blocked, you can solve it by operating this method, if the pumping system is completely broken, then you can only find a professional pipe unclogging staff to deal with it.

You can also check out the triangle valve and float.

If the triangle valve is blocked, the toilet can not be watered, you can disassemble the triangle valve to see if the connection with the inner wire is blocked, to see whether the valve core is open and closed, etc.

If the toilet is not watered, you can first open the lid of the toilet tank to see if the float in the water is used normally, generally the water tank will sink to the bottom when there is no water, otherwise the float is broken, and the float can not sink will cause the water outlet to be closed and not watered.

Marco Po Roman barrel, for some reason suddenly no water, what to do

Hello, the reason and treatment method for the sudden lack of water in the empty tank of Marco Bo Rome: the problem of the toilet not entering the water may be that the water pressure is too low, or it may be that the triangle valve is blocked or the float is broken. 1. The water pressure is too lowThe current toilets are all flush toilets, and if its water pressure is too low, it is difficult to get water.

The low water pressure may be caused by the high floor of the house or the overall water pressure of the community, or it may be caused by the water locust pulse pressure being too low due to the water valve being opened too small. 2. If the triangle valve is blocked, the toilet can not be watered, you can disassemble the triangle valve to see if the connection with the inner wire is blocked, and see if the valve core is open and closed. 3. If the float is broken and the toilet is not in the water, you can first open the lid of the toilet tank to see if the float in the water is in normal use.

It was probably a valve that was flooding and was closed.