What should I do if the urinal flushes the toilet and the floor drain is backed?

Open the toilet tank and see what level the scoop inside the tank is at when it is full. If the water inside is full, use water to pull the card position of the water scoop up and down, the sensitivity of the water scoop, then it is announced that the water scoop equipment has failed, remember to press the position of the water scoop a little, not too high.

The floor drain is not smooth and overflowing, and the floor drain overflow is because the water section is not smooth enough, so that the sewage can not pass through quickly, probably because the internal structure of the floor drain is rough, and the hair is hanging. The solution is to use a tool to clean up the debris inside the floor drain, be careful not to open the screen cover of the floor drain frequently, and do not pour food residues directly into the floor drain.

Floor drain overtaste. The reason for the smell of the floor drain may be that the water seal height of the floor drain is not enough, and the water in the trap dries up quickly, so that the odor in the drain pipe overflows. At this time, you can add a backbend to the floor drain, or replace it with a floor drain of the same specification.

If no one is home for a long time, it is best to seal the floor drain with a lid.

Urinal flush bai

Toilet floor drain on the back du water (anti-water) cause and solution dao law:

1. Reason: 1. Ground version.

The leakage of the water right pipe is too high, and the pressure is not enough, so it is backwater;

2. There may be a lack of ventilation port, which makes the floor drain backwater;

3. It leads to the pressure difference between the inside and outside of the pipeline, the curvature of the pipeline is not enough, the pipeline design is unreasonable, and the curvature of the pipeline is increased. Find someone to change the pipe to a larger one, as long as the toilet is flushed elsewhere, and the sewage gambling game, the pressure in the pipe will force the toilet to backwater.

2. Solution:

The height of the floor drain is determined by the way the drainage system is routed. Therefore, the height of the floor drain selected with it is best to be within 200mm and 120mm respectively, and it must be drained laterally. There are two commonly used concealed installation methods: the partial sinking pipe of the bathroom structure floor slab and the cushion pipe layout of the bathroom.

In order to meet the requirements of the clear height and ergonomics of the bathroom, the former has a sinking headroom of 300mm, and the latter has a maximum cushion height of 170mm.

According to your narrative, there should be a problem with the design or installation of the sewer pipe. Due to the drain of the toilet.

The diameter is 80 mm, assuming that there is a genus in the pipe.

A small amount of mud accumulation, or a large number of bends, will also make the pipe diameter smaller, which will make the discharge difficult. It is recommended that you use a floor drain with a check valve plate and install it with sealant.

It's time to clean the septic tank, the water level of the septic tank exceeds the drain outlet, and the drain pipe has no air vent.

It's likely that your branch pipe is blocked, so hurry up and ask someone to dredge it.

Find a toilet to dredge and quickly help you solve the problem.

What should I do if the urinal flushes the toilet and the floor drain is backed?

Change the floor drain to prevent water reverse. The principle of automatic sealed floor drain: it is a kind of upper and lower brake opening and closing device that uses water energy in reverse.

It uses advanced science and technology and ingenious mechanical principles. The main feature of this product is that it achieves many functions with a unique piston structure and does not require a water seal. The product is installed at the drain port, when the water flows in, the rubber gasket at the bottom of the device is opened, the water is unimpeded, and after the water supply is interrupted, the rubber gasket at the bottom is closed, forming a complete seal, and the gas below the floor drain cannot come up.

It completely prevents the reverse flow of sewer that often occurs in family homes, and can completely resist harmful gases, harmful bacteria and pests from entering the room through the drain. Find a tool to poke and try, maybe there is something to block the disadvantages, it is not good to ask the master for help, after all, the summer is empty, if you want to change a floor drain, you can try the Titan's bathroom, the drainage effect is good, and the smell is prevented.

What should I do if the urinal flushes the toilet and the floor drain is backed?

Open the toilet tank and see what level the water scoop is on when the tank is full. If the water inside the lead macro is full, use water to pull the water scoop up and down next to the card chain, the sensitivity of the water scoop, then it is announced that the water scoop equipment has failed, remember to press the position of the water scoop a little, don't be too high. The floor drain is not smooth and overflowing, and the floor drain overflow is because the water section is not smooth enough, so that the sewage can not pass through quickly, probably because the internal structure of the floor drain is rough, and the hair is hanging.

The solution is to use a tool to clean up the debris inside the floor drain, be careful not to open the screen cover of the floor drain frequently, and do not pour food residues directly into the floor drain.

Hello! According to your narrative, there should be a problem with the design or installation of the sewer pipe. Since the drainage diameter of the toilet is 80 mm, it is assumed that there is a small amount of mud accumulation in the pipe, or if there are many bends, the pipe diameter will be smaller, which will make the discharge difficult.

It is recommended that you use a floor drain with a check valve plate and install it with sealant.

It only represents a personal opinion, don't spray if you don't like it, thank you.

1. Reasons: 1. The floor drain sewer pipe is too high and the pressure is not enough, so it is backwater;

2. There may be a lack of ventilation port, which makes the floor drain backwater;

3. It leads to the pressure difference between the inside and outside of the pipeline, the curvature of the pipeline is not enough, the pipeline design is unreasonable, and the curvature of the pipeline is increased. Find someone to change the pipe to a larger one, as long as the toilet is flushed elsewhere, and the sewage gambling game, the pressure in the pipe will force the toilet to backwater. 1. Reason:

1. The floor drain sewer pipe is too high and the pressure is not enough, so it is backwater;

2. There may be a lack of ventilation port, which makes the floor drain backwater;

3. It leads to the pressure difference between the inside and outside of the pipeline, the curvature of the pipeline is not enough, the pipeline design is unreasonable, and the curvature of the pipeline is increased. Find someone to change the pipe to a larger one, as long as the toilet is flushed elsewhere, and the sewage gambling game, the pressure in the pipe will force the toilet to backwater.

Before asking the question, I felt that the water was slow yesterday, and I couldn't use the toilet when I went home today.

Suddenly anti-watery.

This has to be a professional sewer dredge master, they have professional machines.

It's hard to do without something on your own.