-
Anonymous users2024-01-23Stainless steel and aluminum commonly used on wooden doors are generally T-shaped, U-shaped and flat three, generally in the home building materials market specializing in metal building materials or decorative materials can be bought, in some other hardware and building materials stores can also be bought, but the type and quality are usually worse than the businesses in the home market. Because I don't know which one the landlord needs, I talk about it separately.
1. T-shaped aluminum strip is the most common, first use vernier caliper to measure the width of the T-shaped barb part during installation, and then use a small manual trimming machine or a milling machine to mill the groove where the aluminum strip is to be installed on the wooden door, the groove depth is slightly longer than the barb length of about 1mm, and the width is less than the barb width. Apply a lot of glue in the tank, and the amount of glue should be a very small amount of spillage after putting the aluminum strip in. Use a hacksaw to see the length of the aluminum strip to the length you want, pay attention to pick a straight section as much as possible, trim the edge with a file, then put the aluminum strip into the groove, gently smash it with a rubber hammer, wipe it off with gasoline, and then press the weight and let it stand for 2 hours.
If the door is painted and the paint surface is ready, you can't use gasoline. If you only have a strong glue, then you must apply less and not let the strong glue spill out. You can also use latex or puzzle glue instead, wipe the glue and put the weight for 6 hours, but the effect is not as good as the strong glue.
It is still not recommended to inlay aluminum strips on the painted surface after it is done.
2. U-shaped and flat aluminum strips: these two principles are similar to T-shaped aluminum strips, except that the slotting width should be equal to or slightly larger than the aluminum strips, and the depth should be equal to the thickness of the aluminum materials. The U-shaped strip should be filled with a wooden square of the same size as the U-shaped inner mouth and fixed with strong glue.
Apply vigorously on both sides, let it dry for a while and then stick it. Finally, use a rubber hammer to smash it tightly, and when smashing, the upper side should be padded with a wooden square with shock-absorbing protection to prevent damage to the surface.
Generally, if you do it yourself at home, you can only do this, but if you don't have a certain amount of carpentry skills, it is still a bit difficult.
According to the store of about 100 square meters.
The initial purchase and decoration cost should be at least about 250,000. >>>More
Look at the paint paint as the later process of the factory processing of the wooden door, its advantages and disadvantages directly affect the final use effect. At the same time, the cost of painting is also one of the largest parts of the cost of wooden doors. The painting process can be divided into fully enclosed and semi-open. >>>More
Create a new layer of filled white, and add 400% of the filter noise to evenly distribute. Filter blur, motion blur, angle 0, distance 999. The filter is distorted, and the rotation twist angle is 50. Image - adjust the color - phase saturation 25, brightness - 32, you can adjust the amplitude by yourself.
Solid wood door is usually called solid wood composite door or solid wood craft door on the market, the core of this kind of wooden door is mostly made of fir wood, pine wood and imported filling materials, etc., and the outer MDF or solid wood veneer is pressed at high temperature, and the edge is sealed with solid wood lines. Generally, the core of the high-grade solid wood composite door is mostly filled with high-quality white pine, and the surface is solid wood veneer. Due to the low density, light weight and easy control of moisture content of pine, the weight of the finished door is generally relatively light and not easy to deform. >>>More
1. The material is preferred. The selection of raw materials and accessories directly determines the quality of wooden doors. At present, most of the processes of high-end wooden door brands are solid wood composite materials. >>>More