-
Anonymous users2024-01-23Toilet modification: use a hacksaw blade along the ground to move the glass glue aside, measure the maximum vertical distance from the edge of the sewage nozzle to the root of the wall, and look at the maximum vertical distance from the edge of the toilet outlet to the back edge of the water tank (installation size), if the difference is less than 3 cm, you can install a flaring ring at the mouth of the sewage pipe (you need to open the floor tile to bury the ring, and the ground can only be 5 mm higher), otherwise you have to replace the toilet again, of course, you can also change the sewage pipe if conditions permit.
-
Anonymous users2024-01-22Since that's the case, don't change it, in case it doesn't work, spend more money. Besides, they should have their ideas in this way.
Yes, but the original pipes copied from the kitchen may affect the use of the space, especially the DU gas, smoke exhaust and ZHI sewage pipes cannot be dismantled and modified; The dining hall is changed to a kitchen, and the distance between smoke exhaust, sewage and gas is far away, and there will be a lot of trouble; From the environmental protection requirements are not to discharge the kitchen sewage into the rainwater and bathroom risers, the smoke can not go straight to the window, there will be danger in the case of wind backfilling, and it is not possible to backfill into other people's homes, it is recommended to carefully consider the consequences and carefully design.
First, you need to supervise workers from time to time, the ceiling needs a good integrated ceiling material, such a big brand as the lion ceiling, the quality is clear, the service attitude is not bad, and the brand effect is also to be considered, which is very important.
Because the toilet must be connected to the sewer pipe, the change of location must be agreed by the owner downstairs, if you do not change the downstairs light upstairs and it is not good-looking and easy to cause blockage. So I advise you not to change your position.
Check the router's wireless settings to see if there is any power adjustment. >>>More
Directly to the property to reflect - you can't change the location of the pipeline at will!