-
Anonymous users2024-01-23There must be something wrong with your maintenance methods. It is estimated that sometimes you mop the floor with a lot of water on the mop without unscrewing it, and the water will flow down the cracks in the floor, and after a long time, the floor will definitely bulge.
-
Anonymous users2024-01-22It's damp.
Turn on the air conditioner to drain the moisture, it's not a big problem.
-
Anonymous users2024-01-21In this case, you either dismantle them all and wait for them to dry and re-lay them again.
Wooden floors are particularly troublesome, and a thick layer of oil should be removed with a more corrosive detergent, but it will hurt the wooden floor. If it's really a bit of a problem, it's better to change it.
Look at what you said must be a solitary time, it is a moisture-proof film.
1. Improve the stability of solid wood flooring. After the peritoneum of the floor, the back side is not easy to get wet, which prevents the deformation of the floor due to the increase of moisture content; At the same time, the back coating prevents excessive moisture escape from the floor under dry climate conditions, resulting in low moisture content and cracking. >>>More
The main reason is the price factor, if you can accept the price, it is still good to make solid wood, of course, it takes more effort to maintain.
Three-layer hardwood flooring is good.
1. Compared with the base material: three layers of solid wood wins. The substrate of multi-layer solid wood flooring is the common three-plywood, five-plywood, in addition to some imported or large brands, many small multi-layer solid wood manufacturers will not produce its substrate at all, only responsible for the purchase of ready-made three-plywood, directly veneer paint on the market for sale, naturally there is no perfect quality assurance. >>>More