How to fix a broken toilet in the bathroom

Updated on Bathroom 2024-02-23
3 answers
  1. Anonymous users2024-01-23

    I've seen one repaired, and it's repaired with cement, but let's change it as much as possible. If it is uneven after repair, it will not look good, and it may not be clean.

  2. Anonymous users2024-01-22

    There is no way to fix it, there is only one word: change.

  3. Anonymous users2024-01-21

    For a new one, the seller will generally be responsible for finding someone to install it for you, but you may have to pay some installation fees.

Related questions
The bathroom wall water pipe is cracked and leaking, how to fix it?
9 answers2024-02-23

1.First, check if there is a leak in the water pipe. Ask the plumber to do a pressure test for the water pipe, generally the tap water pressure is, the pressure test is appropriate, and wait for two hours to see if the pressure pointer has moved, if it does not move, then prove that the water pipe is fine, vice versa"Waterproof"Not done. >>>More

How to repair the ball valve in the bathroom if it is broken?
5 answers2024-02-23

Yours is a PP-R pipe, right? It's harder to find the same valve unless you can find that brand. You can go and buy a section of the tube to cut off the original one and make it from scratch. >>>More

How to repair the ruptured pig iron pipe in the bathroom
4 answers2024-02-23

The crack is relatively small, you can use a cast iron electrode to weld it after grinding, (you must not use an ordinary electrode to weld) if it cannot be repaired, cut off and replace it with a pipe joint of the same specification, if it is inconvenient to rotate, you can also use a cast iron electrode to weld it, the most important thing is that it can not be replaced by PVC, it is easy to have problems! I don't know if I'm satisfied, I hope it can be adopted, thank you.

The bathroom sewer pipe is cracked. How much does it cost?
2 answers2024-02-23

I'll give you 100 yuan, you go buy me a 110 pig iron directly! It's very hard for you to repair this, it's all electric welding, it's enough to choke, wrap it with plugging tape, this can be entangled without pressure!

Do you have to dig up all the backfill layers for the sunken toilet squatting pit and toilet change?
3 answers2024-02-23

Most of them don't have to be dug up.

If the perimeter of your bathroom squat pit is relatively flat, you can put the toilet directly on top of the squatting pit, and the toilet outlet is facing the water outlet of the squatting pit, and then use glue such as glass glue to make a circle of glue. Then the cement is filled. There will be no odor. >>>More