-
Anonymous users2024-01-231.The first step, of course, is to close the door from the inside and lock it (just for nothing, but I didn't mean to). This is the front of the door lock, and under the handle is the device for unlocking after the reverse lock.
2.The second step is to use something (pliers, screwdriver or coin) to turn the unlocking device under the handle, open the safety pin, and then turn the handle to open, it is really that simple, mine is the unlocking device is flexible and abnormal, the safety pin does not respond at all.
3.Fortunately, the quality of the lock is not too good, the screw head of the unlocking device is made of plastic, and the screw head is pry off little by little with a screwdriver.
4.Pry flat and push the screw head in until the screw head sinks into the door, revealing the key position.
5..Insert the screwdriver, turn the fuse pin back into place, and the door lock finally opens!
-
Anonymous users2024-01-22Use a large bottle of Coke bottle, cut out the middle section, flatten it, and then aim at the gap between the door lock and the door frame, and stuff it in, similar to the means of opening the door lock with a bank card, and the door will open in one or two clicks. At this time, you will find that the door is locked, and the anti-lock button should be screwed right in time, so as not to use a plastic bottle to come to the door again. This method is simple, crude and effective, in a few seconds.
-
Anonymous users2024-01-21Just insert a thin piece of iron or a screwdriver into the keyhole and twist it.
-
Anonymous users2024-01-20If the handle can be pressed down, if it can't be opened, the lock is broken, find a lock company, if it can't be pressed, then use a flathead screwdriver to turn the vertical groove in the middle into a horizontal one.
-
Anonymous users2024-01-19It may be that the connection between the handle and the lock cylinder has fallen off - if there is someone inside, find a way to give him a screwdriver, unscrew the lock, flip the deadbolt, and open it.
-
Anonymous users2024-01-18Send a picture to see what it's like.
The spherical lock in the bathroom can't be opened; You can find a lock picker, and the general fee is 50 yuan. >>>More
Yes, because the B key was used by the construction workers.,You can't use it after using it.,Or you don't feel at ease.。。 And the A key needless to say, you use it, of course you can open it, the C key doesn't understand much... It should also be possible ...
What kind of lock are you talking about, like an ordinary three-ring lock, as long as the aluminum block spring on the side of the lock is removed (you can use nails and hammers), and then the small steel rod under the front sign can be removed to remove the lock cylinder. If it is the kind of hidden lock, then just disassemble the lock and remove the iron ring on the outside of the lock cylinder. You can also try to use a bank card that costs money, insert it through the crack of the door into the lock center, and insert it hard, it is easy to open. >>>More
It's the easiest way to rush away directly outside, and as for why it's locked, you can think about it slowly after you rush away.
Generally, you can take out the lock cylinder by disassembling the door handle, and pay attention to the inside and outside handles.