-
Anonymous users2024-01-23The water control switch is astringent or stuck.
Take the flush valve apart, wipe it clean with a spring inside, and apply some butter or petroleum jelly.
-
Anonymous users2024-01-22If the button or water outlet is dirty and stuck, it won't reset, and it will be fine to clean it.
-
Anonymous users2024-01-21If it's broken, replace it.
-
Anonymous users2024-01-20Open the lid and take a look, it should be that the inside is not bounced up.
-
Anonymous users2024-01-19Get a new one, or you have to lift the toilet lid after each use and press the inside control ball with your hand to come up.
This depends on the specific location and situation, the water tank must be fixed, if you don't make an eye on the tile, then you can only make a bracket or something fixed, as long as it can be fixed, it can be replaced!
In general, in residential buildings, the tap water inlet valve at home is one, but after entering the door, it is the drinking water that is connected to the kitchen, and the toilet is connected to the toilet tank to flush the toilet.
If you check carefully, it may be that the filter on the faucet outlet is blocked, causing the tap water to back up to the solar water heater tank, just clean the filter and solve the problem.
Here's how to repair toilet flush valves:
1. Close the main water inlet gate of your home first; >>>More
Where is the inlet valve in the toilet? How to close
Dear, I am happy to answer for you: where is the inlet valve of the toilet? How to close the answer in the toilet tank, there is an octagonal valve, which is connected to the water inlet pipe, and closing it is equivalent to closing the water inlet valve, and the water cannot enter the water tank. >>>More