-
Anonymous users2024-01-23Close the angle valve first, this estimate is old-fashioned, there are two screws under the faucet, unscrew it with pliers, and then take it off from above.
If the screws are rusted, you can unscrew the two screws, and it's okay.
-
Anonymous users2024-01-22Workaround:
1. Generally, the abandoned or old water pipes can be removed directly from the wall.
2. Or you don't need to dismantle and rearrange new water pipelines. Usually the water pipes are now on top.
3. The hose and the faucet are connected with threads, the hose is connected to the faucet with a joint, and there is a small hexagon on the joint with a wrench to clamp it and slowly rotate it counterclockwise, and the pipe can be removed.
-
Anonymous users2024-01-21Is the water hose broken, I also encountered it a few days ago, did a while, found that it is still very easy to disassemble, first use a wrench to disassemble the joint close to the end of the wall, lift the vegetable washing basin, see the lower part of the faucet position, see the lower part of the faucet position, see the lower part of the large number of bolts that fix the faucet, and then use the activity wrench to fix the large number of bolts of the faucet disassembled, and then the faucet can be removed, replace the metal hose: remove the broken pipe with hand pliers, and replace it with a newly bought hose.
-
Anonymous users2024-01-201 turn off water (cold.) Hot) 2 twist the lower connecting pipe 3 twist the fixed twist of the dragon (under the dragon head, if there is a rose, you loose).
-
Anonymous users2024-01-19First dismantle the two inlet pipes from below, and then remove the fixed nut, and you can pick it up from above.
-
Anonymous users2024-01-18The procedure for disassembly is:
1. Turn off the main switch. Find the red and blue dots under the handle. Snap it open with your hand and reveal a small hole.
2. Use a flashlight to observe the hole to see whether a fixing screw inside is a cross or a slot, and use the corresponding screwdriver to loosen it.
A few brands of this screw have an inner square hole (e.g. Moen), which is a bit more cumbersome. When tools are not available, be careful not to damage the screw mouth with other alternative tools that can be removed.
3. When the screw is loosened, the handle can be removed.
Fourth, at this time, what you see is a large copper nut, after removing the nut with a movable wrench, you can remove the valve core of the faucet.
5. Observe whether the copper plane under the valve core is uneven or whether there are fine sand grains, and remove it. Collapse.
In kitchen decoration, the sink is the most important accessory. Because the sink is the most frequently used. The following is a summary of the points to note about the purchase of sinks. >>>More
Yes, yes, yes, it can really be used, it can be used completely, it is the same as mineral water, do you see what I said?
The specific style depends on your preference;
However, it is best to use the material that is pure copper on the inside and stainless steel on the outside; >>>More
You can go to the Decoration Material City to pick up, where you can find everything at a price from high to low.
As long as you plug it out, it's actually very simple, buy some white cement, fine sea sand, and water you mix them, mix them like clay, and then fill them full, the key is that you have enough time to let it dry, preferably for three or five days without water. But if it's me, I'll take out the teeth, go and buy a saw blade, soft teeth, eight cents, take it to the house and break it into two from the middle, otherwise it's too long, find some cotton cloth at one end to wrap it, and then use my hand to see it in the water pipe, slowly saw, the hand will not be too sore, saw a hook on the left and right, you can feel it through the saw, because the sound is different, the feel is not the same, first divide the residual teeth into two parts, and then use the medium-sized one-word Rose Batch and a small hammer to knock them apart, and finally put water to rinse, If nothing else, you can install the faucet again. If there's an accident, it's never too late to plug it in.