The flush toilet penetrates into the floor, and the floor is wet, and there is it without having a d

Updated on Toilet 2024-02-13
1 answers
  1. Anonymous users2024-01-23

    Apply pure cement to the contact between the toilet seat and the ground, and press it firmly.

Related questions
9 answers2024-02-13

Demonstrate it a few times, then report it, pose it, and then give it a reward for eating, and then let it go up on its own, if it doesn't go up, you do the above process a few times, which requires a lot of patience.

1 answers2024-02-13

It's okay, it will be absorbed by the floor and volatilized. However, water stains should be cleaned up in time. I hope my answer can help you.

2 answers2024-02-13

The half-moon button you said is a button that represents the amount of flushing, and generally the toilet is a 2-level flush volume, a small amount of water, and a large amount of water. Of course, a small half moon is a small amount of water. In addition, there are some of them that are flush levels, most of which are on the side of the tank.

2 answers2024-02-13

It must be stuffed with something in the sewer pipe, after all, urine is easy to go down, find a master to help you see.

5 answers2024-02-13

Under normal circumstances, the two buttons on the toilet tank will be one large and one small, the large pressure is the large flush volume, and the small pressure is the small flush volume, which is a water-saving design, and the current toilet is basically like this.