In the future, I will do the decoration from the new, and now I will make it easier to do the waterp

According to your narrative.

1. Suggestion 1: Use rigid waterproof materials (such as: JS, etc.) for construction. 2. Use flexible waterproof materials (such as:

polyurethane, etc.). But whether you use it or not, I personally think that it should be constructed according to waterproof standards. The bath wall is turned upside down, and the other walls are turned over, and then plastered.

Second, what about this price, because the materials used are different from the brand, the price varies greatly, so what to choose is decided according to your own economy.

3. After the waterproofing is done, the closed water test must be carried out, not less than 48 hours, and there is no water leakage point, and then the construction of the next process is carried out.

Material: 1. Polyurethane waterproof (extracted from asphalt). Please don't buy coal coke refined, it's too toxic.

2. Add waterproofing agent to the mud and brush the leak plugging king at the floor drain.

Both methods are safe, and the second one is relatively cheap, and it is more reliable and robust. But there are conditions: the powder layer and tiles should be added with waterproofing agent.

It is generally suitable for second-hand house decoration. Method: First, buy a bucket of Dongfang Yuhong's waterproof coating, estimated at about 90 yuan a barrel, and then buy a brush, 5-10 yuan.

Second, clean the walls and floors of the current bathroom to ensure that the floors and walls are dry.

Third, use a brush to brush the waterproof paint on the ground and wall, brush it every three to five hours, and use it if you are doing it yourself.

3. After finishing, the closed water test should be carried out, not less than 24 hours, preferably 48 hours, no water seepage is ok, and then the next process is carried out.

4. If you are looking for a construction team to do, you have to consult the labor cost, now the labor cost is more expensive, generally more than 200 yuan a day, if the contractor is contracted, 100 yuan m, about 350 yuan, not necessarily someone will do it, because the area is too small, if you have a strong ability to do it yourself, I hope to do it yourself, economical, I don't understand to continue to add.

If it is a first-floor building and there is no basement, there are many self-built and self-used users of the ground waterproofing on the first floor, but according to the building design specifications, the waterproofing of the bathroom and shower room can be considered to use waterproof mortar, which is conducive to inlay (paste) tiles, the ground waterproof to the corner of the wall should be rolled up not less than 250mm (the specification), and the waterproof height of the shower area wall is not less than 1800mm (the specification).

Rough room, there should be no toilet (toilet basin), no can not be large, or it is recommended that you find a master, cloth pipe toilet is not a simple matter.

If you just want to set up a hole to drain the water, that won't work, in the future, fill the drain, walk into the water pipe, drain pipe, and install the toilet need to smash the cement surface, so it's useless to do waterproof. Therefore, it is recommended that you plan the location of the sink, toilet and shower, take all the pipes in advance, install the toilet (the toilet can be replaced in the future), and then do the ground waterproofing, the wall is 20 cm high waterproof, the ground is all done, and then cover with cement mortar, and scrape the dot line after the surface is smoothed and non-slip. According to the calculation of the cheapest toilet, the labor package is about 1,000 yuan.

You can use SBS120 waterproof membrane to do it, you need a bag of cement for materials, and a box of 107 rubber powder for 5 meters of membrane, which is about 80 yuan.

Rough house developers generally do simple waterproofing, if you don't do it with Lei Bangshi, make a smooth cement floor needs 1 bag of cement, yellow sand 250

1. Waterproofing is a functional need, so first of all, you should not ignore it because it is not a long-term residence.

2. Generally speaking, the new commercial housing has been waterproofed in the civil construction stage, and the waterproofing of the later decoration is mainly for insurance (China's construction quality should be understood by everyone).

3. Ordinary home decoration methods, you have to do it yourself, buy acrylic or polyurethane waterproof coatings, do it three times, the wall should be 300mm high, according to the normal process of working with materials, a square is 40-50 yuan, look at your area, how much money can be spent, how cheap can it be.

The cost of waterproofing depends on your local labor price, and you also need to consult the market in person.

There are two types of waterproof coatings on the market. One is rigid and the other is flexible.

Rigid waterproofing refers to: Polyurethane waterproofing, the kind of construction projects we commonly use, is called asphalt waterproofing by ordinary people.

There is also a kind of flexible, in some large cities or friends who pay more attention to decoration will use flexible to do secondary waterproofing, that is to say, flexible is more durable than rigid, not easy to crack.