-
It is estimated that it is stained in winter, and the binding is poor, so you can buy structural adhesive and stick it on a few points yourself, and the solidification period is one day.
-
When tiling, the ratio of cement, sand, and lime is not right. Less cement or poor quality. The tiles won't stick.
-
Use structural adhesive to paste it, the cement slurry can't stand such a big shrinkage.
-
Send me a picture to see, okay?? There are many cases of this.
-
It may be aging, or it may have a large hot and cold cross for a short time, so it is recommended to find someone to repair it to prevent danger.
-
It's too humid, or it's too hot to swell next to the chimney and cause it to break away.
-
You didn't take care of the walls when you tiled your home! If there was lime at the time, it was pasted and it is very container now.
-
The temperature is too high, it will fall off naturally, and who told your home to use tiles even for the chimney.
-
When tiling tiles, there is a gap between them and the wall, and the air is hot and cold.
-
See for yourself whether it is a tile quality problem or a decoration technology problem. Eighty percent is decoration.
-
Your kitchen tile is smoky, isn't it grinning first, and it is slowly falling.
-
Maybe it's a construction problem, but let's find someone to fix it first.
-
The chimney is hot, and the cement of the outer tiles is less
-
The cement is not of good quality and has poor viscosity.
-
Because the temperature is too high, the cement is unstable. It is recommended not to use ceramics for adoption.
-
If the temperature is high, you will get out of trouble over time.
It's time to knock it off and re-pave it.
It is best to choose the re-paving material by yourself, choose a good material, if it is contracted to an outside master, you may cut corners on the material. Paving should also be supervised. This kind of thing should be taken seriously. >>>More
Do not use glass in a large area on the ceiling, the construction cost is more expensive, if you want to increase the sense of fashion, you can use glass locally, but the effect of silver mirror will be much better than glass.
The best way to do this is to place the level on the wall and turn it for leveling. It is necessary to determine whether the instrument is absolutely level, otherwise the larger the area, the more the difference.
It's not good, it's not bad, it's not bad, it doesn't have any effect. >>>More
Remove the oil cup, oil net and other parts of the range hood, soak it in a basin of warm water mixed with 3-5 drops of dish soap and 50ml of vinegar, soak it for 10-20 minutes, and then scrub it with a clean rag. The enclosure and other parts can also be cleaned with this solution. This method has no damage to human skin, no corrosion to the device, and the surface still maintains the original luster after cleaning.