-
Anonymous users2024-01-23It can be closed by applying glass glue. Moreover, the glass is more elastic and will not affect the water on the washing machine.
-
Anonymous users2024-01-22The automatic sleeve washing machine can be used on the water, and after it is full of water, it will alarm if it is not washed, and it will not turn. The reason for this is that the water level switch does not play the role of water level control, and there is a problem.
The water level switch, generally installed on the control panel of the washing machine, is connected by a compressed air hose to the air chamber nozzle at the lower part of the washing machine's water cylinder.
When the water level switch has set the height of the water level, the electromagnetic water inlet valve fills water into the laundry bucket, the lower part of the air chamber is closed by water when the water volume reaches a certain height, with the increase of the water volume, the pressure transmitted by the air chamber to the water level switch through the hose increases, when the set water level is reached, the compressed air pushes the rubber diaphragm of the water level switch to act, so that the electrical contact in the water level switch is connected.
At this time, the electrical contacts in the water level switch are turned on, and the electrical signal is sent to the computer board of the washing machine, and the computer board will send instructions to close the electromagnetic water inlet valve to stop water filling and carry out the washing program, and the washing machine motor will be powered to start the washing operation.
Therefore, the reason why the washing machine (not turning) cannot enter the washing program is that there is a problem with the water level switch and does not send out an electrical signal that the water level has reached, and the result is that the following washing program cannot be carried out.
It is recommended to contact the after-sales service department of the washing machine according to the brand and model of the washing machine for repair or replace the water level switch.
Not quite right. The washing machine was noisy and there was sewage flowing, which was not good.
If you put the washing machine on the unenclosed balcony, you can add a protective cover to the washing machine, or weld the base. >>>More
As long as it can be done, the water discharged from the washing machine can be drained through the rainwater pipe, and at the same time, it can be put into the washing machine without affecting the overall use of the rainwater pipe and leaking water. As for the water supply and power supply, it is relatively easy to solve, add a power strip or press a water connection pipe to completely use the washing machine.
The washing machine is left there and no one else has the right to manage it. As long as the normal drainage does not leak into their home. It does not interfere with the rest of other people's lives. It doesn't matter.
If it rains a lot on your balcony, it is better to make some waterproofing measures for the washing machine.