Is it possible to install a toilet with a hole spacing of 270cm and a toilet with a spacing of 300 h

Updated on Toilet 2024-02-15
1 answers
  1. Anonymous users2024-01-23

    This is something that can be installed. Because when installing the toilet, there is a four-centimeter margin that can be adjusted.

Related questions
4 answers2024-02-15

The meaning of toilet pit distance refers to the size of the wall after tiling and the center (position) of the toilet drain pipe to collapse. >>>More

2 answers2024-02-15

First of all, you need to determine whether it is the water seepage of the water pipe itself, or the water seepage caused by the subtle cracks between the water pipe wall and the floor, if it is a water pipe leakage, you can choose to change the water pipe, if it is the latter, it can be solved more easily, and the method of testing them can see whether the water of the water pipe is intermittently leaking, intermittent water seepage is more likely to be a crack between the water pipe wall and the floor that causes water seepage, that is, when someone uses water on it, it leaks, I don't know if it is also a bathroom above, When doing waterproofing, you need to do waterproofing on it, you can use the best seam treasure to scrape a layer around the pipe wall, the seam treasure itself has good adhesion and waterproofness, can effectively deal with the problem of water seepage, and what questions can continue to ask me.

2 answers2024-02-15

How is the building structured? In general, it is not allowed to build a small room outside the building. Is your family's firewood property allowed to be built? >>>More

1 answers2024-02-15

There is no problem, according to the ergonomic size to ensure that the person is more comfortable to sit on the toilet, it should be that the sum of the dimensions of both sides of the toilet should not be less than 900MM. THEREFORE, YOUR BATHROOM CABINET CAN NOT BE BOUGHT MORE THAN 800MM, YOU CAN ALSO BUY A SMALLER ONE, AND THE BATHROOM CABINET WILL SEEM TO BE VERY CROWDED WHEN YOU BUY A LARGE BATHROOM.

1 answers2024-02-15

The installation of the toilet sewer pipe must be accurate, and the socket should be glued, and all plugs must be plugged to the end. After the installation, the hole through the floor slab should be carefully filled with cement mortar to prevent water seepage in the future. After the water pipe is ready, the reserved water nozzle should be wrapped to prevent the cement from falling.