How to clean the paint of bathroom tiles

Updated on Bathroom 2024-02-08
1 answers
  1. Anonymous users2024-01-23

    1. Daily cleaning: The daily cleaning of polished tiles can be cleaned with water and detergents, such as detergent, soapy water, etc. 2. Polished brick scratch treatment:

    When there are slight scratches on the surface of the polished bricks, you can apply a little toothpaste on the scratches, wipe them repeatedly with a soft dry cloth, wipe off the scratches, and then apply floor wax to make the tiles as bright as new. 3. Special pollutant cleaning method: After the surface of the polishing tile is polluted, it should be wiped with a soft cloth immediately and rinsed with water. Type of Contamination:

    Tea, coffee, ice cream, grease - detergents: dilute alkali solutions such as NaOH, KHCO3 Contamination type: sediment, ink, rust, mortar - detergents:

    HCL, HNO3, H2SO4 and other dilute acid solutions, ink is best cleaned with oxalic acid Contamination type: paint, drawing pen - detergent: turpentine, trichloroethylene, acetone Contamination type:

    Soy sauce, wax, toner – Detergent: acid or alkaline solution Contamination type: Muddy water – Detergent:

    Flaxseed oil.

Related questions
11 answers2024-02-08

[Enter the area and get a free decoration quote].

With the change of the times, people have paid more and more attention to the aesthetics of the restroom. For example, most families have tiles in their bathrooms, but the cleaning of tiles is a problem that puzzles countless people. So, how to clean bathroom tiles? >>>More

13 answers2024-02-08

Kitchen and bathroom tiles are often yellowed and blackened by greasy, rusty, soap dirt and other stains, in order to keep the porcelain surface clean and not damage the porcelain surface brightness, you can use a multi-functional stain remover to clean (available in supermarkets). As for the gaps in the tiles, you can first use a brush dipped in a little detergent to remove the dirt, and then brush a waterproof agent on the gaps, which can not only prevent water seepage but also prevent mold growth.

8 answers2024-02-08

Ceramic tiles often loosen and fall off in the process of use, because the bonding fastness of the cement mortar used in the current ceramic tile paste is not enough, and it is in a humid environment for a long time, so it is easy to loosen and fall off. There is a method of attaching ceramic tiles with a resin-based adhesive, which not only meets or exceeds the strength of the ceramic tile, but also does not cause it to fall off when exposed to humidity for a long time. >>>More

7 answers2024-02-08

Hello! Stick toilet paper or paper towels on the tiles, spray detergent on them and leave them for a while, just like a woman applying a face mask, not only will the detergent not drip everywhere, but the grease will all stick. Just tear off the toilet paper and wipe it with a clean rag dipped in water 1 or 2 times, and the tiles will look brand new. >>>More

6 answers2024-02-08

For ink, beer, coffee and other stains, you may wish to use laundry detergent and dish soap to clean, and then wipe with a dry cloth, the effect is also very good. >>>More