-
Anonymous users2024-01-23It doesn't matter if the edge banding line changes the curvature and deformation.
The door set is good, and the edge banding line is inserted into the door sleeve and it is naturally straight.
If the flat edge is fixed at both ends, the middle is pushed into place and fixed.
It's naturally straight, don't worry.
As long as it doesn't become a twist, you can rest assured.
-
Anonymous users2024-01-22Once the wooden door is deformed, it is difficult to repair, so it is important to maintain it in daily life. Protective wax or special detergent can be used to evenly coat the surface of the wooden door to form a moisture-proof layer on the surface, which is a good way to prevent moisture intrusion, and the solid wood door is not easy to deform. If there is a lot of humidity in the room, ventilation fans and ventilators are very effective.
At present, the main means to prevent wood deformation is to use mechanical and technical methods to change the internal stress and moisture content of wood, and the most effective and most commonly used method to change the internal stress is to finger joint pine or fir wood, and the method to change the moisture content of wood is to carry out secondary drying. The quality of the processing technology in the production of wooden doors, such as the pressure, temperature, balance layer, gluing and other factors of the press will directly affect whether the wooden door is deformed and cracked during use.
The standard width of the solid wood door of the bedroom door is 80 cm, and the installation of the solid wood door needs to pay attention to the door sleeve and the door hole after filling it with a wooden wedge, and then use wave nails to fix the door cover and the wooden board in the door opening, if you find that the gap is too large, you can fill it with styrofoam. After installing the door leaf on the door cover, adjust the flexibility of the door leaf to test the opening, and check whether the door crack meets the standard size.
How long have you been using it? If it is newly bought, then you should find a place to sell it to confirm, it is likely that the moisture content of the product itself is too high. If it's been used for a long time, then it depends on whether you have too much humidity there.
Once the wooden door expands by moisture, it will be deformed, and the general deformation is likely to lead to the problem that the door cannot be closed, which is very worrying. In fact, the main reasons for the deformation of the wooden door are as follows: 1. Damp, the high moisture content of the wood is also a major reason for the deformation of the wooden door. >>>More
The method of relieving the sinking deformation of the solid wood door. >>>More
This is related to the physical properties of the wood, which expands when it absorbs water when it is damp, and returns to its original state after drying, and there are cracks and distortions after many times.