What is the problem of rural family toilet flushing without water absorption sound, and how to solve

What is the problem of toilet flushing in rural households without water absorption sound? How to fix it?

It is possible that the press that flushes the toilet is broken, so there is no sound and the water cannot be pressed, in this case, it can only be repaired, and this situation will not happen.

What is the problem that the toilet flushing in rural homes does not absorb water, this may be that your flush valve is faulty or broken.

Rural family toilets, flushing does not have a sound of water absorption, the main reason is that its pressure is not enough, it should be, increase the pressure effect is good.

There is no sound of water absorption in rural family toilets, is it the kind of open toilet, the kind of toilet that needs to be excreted, then there must be no sound of water absorption, how to solve it? It would be nice to install a regular toilet.

If there is no sound of stream water when flushing toilets in rural homes, there should be no water flowing over, and you can just look at the water pipes.

If there is no sound of water absorption, I suggest you find someone from a repair company to help you.

Because it takes professional people to help you.

So it can be solved.

It is normal for rural household toilets to flush without water absorption sound, and there will be no sound if the drainage gap is small.

What is the problem of rural family toilet flushing without water absorption sound, and how to solve it? Is there no elbow below?

That's because of the toilet setting problem, and the reason why the city toilet has a water absorption sound is because it is an S-shaped structure, and if it is a straight pipe, there will be no water absorption sound.

There is no sound of water absorption, is the toilet broken, otherwise this normal installation, there is no problem.

But the pressure of the impact is not enough, right?

If you can rush down quickly, it is smooth and normal.

It depends on the amount of water you use when flushing, if the amount of water is large, don't worry about it, if the water output is small, adjust the water drift.

Maybe it's because the toilets in the countryside are just a toilet and a pit, not like in the city.

There is a sound of water absorption, as long as it can be washed down smoothly, it is no problem.

It may be that the sewer is blocked, and the water does not flow below. There is no sound of water absorption. You can get someone who specializes in sewer repairs to fix it.

In this case, it may be caused by a partial blockage in the drain. I guess it would be nice to clean it up.

What do you want? As long as he can rinse it clean, do you have to listen to that sound?

Rural conditions are poor, and they can't afford to press the sewers.

It is possible that people have a silent design, and the toilet can be flushed normally.

As long as he can rush down. It doesn't matter.

It's a good question, but it's actually a small problem, and it's okay to be able to use it normally.