-
This kind of lamp is easy to break, the best way is to find an electrician to install an energy-saving lamp holder on the wall, install an energy-saving bulb, and it will be much more convenient in the future.
-
Your wait is equivalent to a gusset. Find a paper cutter. Insert through the slit. Then pull down. You try. If not, you can find someone who sells local hardware at the door and let him help you get it. Hope it helps.
Have a great day.
-
You have to remove the top plate next to it and open the light box to change it, which is very troublesome.
Generally, the outer glass cover will have a snap, and you don't need to use too much force to remove it, and then replace the bulb or tube. >>>More
Same as my family.
This ceiling lamp is snap-in, grab the external source of the ceiling lamp (the round one) with both hands and pull it down, you should be able to see how many springs (steel wires with characteristics) are inside, and then pin the steel wire inside, so that you can take off the lampshade. >>>More
In order to better save space, you can choose a corner to create a shower room, so that you can make clever use of the corner space and realize the clever design of the shower room. In order to rationalize the bathing space, we can directly install a shower shower set, and usually realize shower bathing, which is also a more reasonable installation method, which can better meet your daily bathing needs.
Just shake it from side to side, there are two small discs stuck under him, and it will shake from side to side.
The inlet pipe of the exchanger should be installed at the lower end, and the inlet and outlet pipes should be installed on the left and right faces. The top tube head is used to hold the running air.