-
Anonymous users2024-01-23The toilet sewer pipe is made of cast iron and PVC, of which the white plastic pipe is the PVC pipe, and the one that is a little rusty is the cast iron pipe.
-
Anonymous users2024-01-22The one which was sealed with yellow tape, the one with the largest diameter.
Go to the hardware store and buy a screw on the same model, but you need to buy the whole set.
Yes, the most important thing is to buy a curved PVC pipe and a straight PVC pipe with glue to adjust the height through the length of the pipe.
The toilet drain is 400 meters from the wall and is as high as the floor, or less than one centimeter high.
There is a margin of 4 to 5 cm to adjust the toilet to install it, and if you are 3 cm off, you can install the toilet normally.
After the installation of the water pipe, the pressurization test must be carried out: the pressurization test is generally carried out under the condition of double water pressure, and there should be no water leakage in the test. Regardless of these basically experienced masters, they know that the bathroom installation master who is looking for Master Wan does not need to consider these problems at all, and the more experienced master will basically do. >>>More